Thanks Don, I have enough ferrules to do the job, just didn't want any
surprises.
----- Original Message -----
From: Don M
To: ShopTalk@mail.msen.com
Sent: Thursday, April 01, 2010 6:17 PM
Subject: Re: ShopTalk: Callaway Diablo
I haven't reshafted one. But I would assume that it is like the other
recent Cally woods. If so, it would have a stepped ferrule that inserts into
the first 3-4mm (my guestimate) of the hosel bore. If you don't have one, you
can wrap masking tape on the shaft beneath a plain ferrule to do the same sort
of buildup. Or if you have a collared ferrule, that will do the trick, maybe
combined with the tape buildup just to be safe.
-Don M
--- On Thu, 4/1/10, Pat-On Target Golf <ontargetg...@comcast.net> wrote:
From: Pat-On Target Golf <ontargetg...@comcast.net>
Subject: Re: ShopTalk: Callaway Diablo
To: ShopTalk@mail.msen.com
Date: Thursday, April 1, 2010, 3:48 PM
So the Diablo doesn't even exist yet? Just seeing if you guys were
paying attention;-)
----- Original Message -----
From: Don M
To: ShopTalk@mail.msen.com
Sent: Thursday, April 01, 2010 3:55 PM
Subject: Re: ShopTalk: Callaway Diablo
Pat, it's been so long, your computer thinks today is May 1,
2003.
:)
-Don M
--- On Thu, 5/1/03, Pat-On Target Golf
<ontargetg...@comcast.net> wrote:
From: Pat-On Target Golf <ontargetg...@comcast.net>
Subject: ShopTalk: Callaway Diablo
To: ShopTalk@mail.msen.com
Date: Thursday, May 1, 2003, 2:31 PM
Hi shoptalkers, it's been awhile, business is just picking
up and I have a Diablo driver reshaft question. Anything I should be
concerened about on this model? Ferrule used?
TIA
Thank you,
Pat-On Target Golf LLC
Turnersville, NJ 08012
856 905 7155
ontargetg...@comcast.net
www.ontargetgolf.com
