Scott Ruckh wrote:
> I am trying to follow the Traffic Shaping guide and do what I thought
> would be simple traffic shaping. I have a basic 3 interface setup and
> would like to allocate bandwith to the VoIP device on the network. In my
> scenario eth2 is connected to internet, and eth1 is connected to zone
> where VoIP is connected.
>
> I am getting an illegal rate error although I believe I have entered the
> rate using the correct syntax. Can anyone see where I have made my error?
>
> Thank You.
>
> Here is the config and error in question:
>
> shorewall version
> 3.2.1
>
> Kernel
> 2.6.13.4 x86_64
>
> grep TC_ENABLED /etc/shorewall/shorewall.conf
> TC_ENABLED=Internal
>
> grep CLEAR_TC /etc/shorewall/shorewall.conf
> CLEAR_TC=Yes
>
>
>
> tail /etc/shorewall/tcdevice
> #INTERFACE IN-BANDWITH OUT-BANDWIDTH
> eth2 16384kbit 1126kbits
-----Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool Shoreline, \ http://shorewall.net Washington USA \ [EMAIL PROTECTED] PGP Public Key \ https://lists.shorewall.net/teastep.pgp.key
signature.asc
Description: OpenPGP digital signature
------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/
_______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
