I am building a shorewall box that the last post has the SSH error and
wanted
some feedback from the list if possible. At first I thought the two ISP's I
building this
for had two T-1's with FQ ip's as it. I have the box built for this ready to
go.
Now I find out that one of the T-1's is non-routed with 5 useable ips
/29--Good
the other T-1 is natted in using one of the local lan Ip's. Both full
T-1's-----Not so Good
The Idea is to load balance and route specific stuff like mail etc:
The second ISP will NOT give me a FQ ip. Shorewall fits the bill
perfect for this need.
Currently the network is using routeback and static routes
to route specific traffic to the natted ISP gateway. The only solution I
could
think of was, I asked the ISP if they could change the currently
natted gateway (lan ip on internal) to a different Class 3 IP such as
10.15.75.1
then I could configure my second ISP to the same network
10.15.75.2 and track and balance the routes.
Now would there be a better way to do this and leave the
Natted ISP with the same IP as the lan (loc) if ??
Thanks
Mike
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users
