Hi all, after a half day searching for an error, sniffing and upgrading to the newest shorewall version I give up and the problem to you. I have following configuration in my /etc/shorewall/masq:
#INTERFACE SOURCE ADDRESS vlan7::10.231.0.0/16 192.168.222.0/24 10.231.113.30 vlan7 192.168.222.0/24 10.1.0.38 Towards a special network I need a masking of all outgoing traffic to 10.231.113.30, in all other cases I use the basic address of the interface for masking. What happens? Nothing - no packet towards an address in 10.231.0.0 leaves the interface. If I swap the entries in the config file, the packets go through the interface, but are masked with the wrong IP (what would be the expected behavior). So I'm sure that there is no fault in the other config files. I know that I had the same construction working some month ago. Only difference is, that there it was a "real" eth interface and now it's a vlan. Any idea? Thanks, Christian ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
