Hello: CentOS Shorewall 4.0.5 dnsdjb (DNS)
I am trying to setup a very simple network with (1) firewall server (2) dmz with two DNS name servers. I have IP: 65.103.190.104/28 mask: 255.255.255.248 (8 IP addresses available from Qwest). Network is as below: 65.103.190.104: Network 65.103.190.105: FW 65.103.190.106: NS1 65.103.190.108: NS2 65.103.190.110: Gateway 65.103.190.111: Broadcast SETUP: I am using djbdns (http://cr.yp.to/djbdns.html) software to setup the DNS servers. This software requires that the authoritative DNS server, known as "tinydns" must run on a separate IP address (see http://cr.yp.to/djbdns/run-server.html). This is accomplished as follows: eth0: 65.103.190.106 (NS1 Server) eth0:1 65.103.190.107 (authoritative server "tinydns" running on NS1 Server listening on 65.103.190.107 ) PROBLEM: I setup proxyarp (Shorewall), as follows: #ADDRESS INTERFACE External Haveroute 65.103.190.106 eth1 eth0 no 65.103.190.107 eth1 eth0:1 no When I issue the "shorewall start" command, I get the following error: ..... setting up Proxy ARP... SIOCSARP: no such device ERROR: command 'arp -I eth0:1 -Ds 65.103.190.107 eth0:1 Pub' failed Any suggestion? PS: If my explanation is not clear, please, let me know, I will try to explain it better. Kirt ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
