I have several computers connected to the internet through a DSL router that
assigns rfc1918 (192.168.1.x) addresses to the systems connected. I have a
server where shorewall is installed with one interface eth0, with a static
ip (192.168.1.3). The router is configured to forward all connections from
the internet to the linux server.
I'd like to know how I can configure shorewall to allow connections from the
local network (192.168.1.x) to several services (smb mainly) but not from
the internet.
I thought I needed to create the 'loc' zone with ip addresses in the net
192.168.1.0, and assume any other address to come from the 'net' zone.
I've read I need to use the hosts file, but I haven't been able to find find
out how.
I'm quite sure this question has come up before, unfortunately I couldn't
find the answer. :(
TIA,
Pedro.
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Shorewall-users mailing list
Shorewall-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/shorewall-users
