Thank you.
That fixed it.
> Date: Mon, 21 Jan 2008 10:32:01 -0800> From: [EMAIL PROTECTED]> To:
> [email protected]> Subject: Re: [Shorewall-users] Setting
> up a DMZ> > P Hennessy wrote:> > Hi,> > > > Using Shorewall 4.0.7.> > 3
> Interfaces.> > > > I have setup a DMZ, but can't get any access in or out.> >
> The loc is working fine for connection to $FW and net.> > > > eth0: for
> connection to Net using adsl ppp0> > eth1: loc IP 10.10.1.3 netmask
> 255.0.0.0> > eth2: dmz IP 10.10.2.3 netmask 255.0.0.0> >> > Unworkable IP
> configuration. eth1 and eth2 ARE THE SAME NETWORK> (10.0.0.0/8). You need
> netmask 255.255.255.0 (/24) so that eth1 is> 10.10.1.0/24 and eth2 is
> 10.10.2.0/24.> > -Tom> -- > Tom Eastep \ Nothing is foolproof to a
> sufficiently talented fool> Shoreline, \ http://shorewall.net> Washington USA
> \ [EMAIL PROTECTED]> PGP Public Key \
> https://lists.shorewall.net/teastep.pgp.key>
_________________________________________________________________
Get 30 Free Emoticons for your Windows Live Messenger
http://www.livemessenger-emoticons.com/en-ie
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users
