My telco is moving to feeding me over fiber, breaking out with a media converter to one Ethernet interface. At present, I am retaining the static feed over copper on eth0, and taking the two new feeds via vlans on eth1. I have configured the static IP feed on eth1:790 as vlan 790, and that seems to be fine, and eth1:780 as the PPPOE feed, and brought up PPPOE to give me an IP, that is configured as interface ppp0. The ppp0 feed works fine. I have trouble understanding how to refer to eth1:790 in the configuration files. Should I just call it eth1 or can I refer to it as eth1:790?
Chris Mason -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Shorewall-users mailing list Shorewall-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/shorewall-users
