Sorry for bad formatting this is from my phone. My multi isp issue was because 
I didn't follow the readme regarding the masq file and I had similar issues. 
How does your masq file look like?

Regards

-----Original Message-----
From: Pierre CHAUSSEE <[EMAIL PROTECTED]>
Sent: 05 September 2008 23:03
To: shorewall-users@lists.sourceforge.net
Subject: [Shorewall-users] Problem with MultiISP configuration (no rc-rules), 
please help!

Hi,

 I'm trying to set up a multi ISP configuration.
 I can make it work without shorewall, except for incoming connections :
 i want to be able to connect to any oof the internet interfaces from
 outside, I can not with ports forwarded on the local network : I am not
 always receiving an answer
 I just want the same result as a multiWAN router that does load balancing.

 I discovered shorewall and the "MultiISP" configuration that seemed to
 answer my problem.
 I did set all files but the providers one, everything works then.
 But when I fill the providers file, nothing works anymore : outgoing
 connections are no more working, neither does incoming ones.

 Please help.

  

 Here are the commands you request
 (just so you know : eth0,eth1,eth2 are internet connections and eth4 is
 the only used local one) :

 #/sbin/shorewall version
 4.0.13

 #ip addr show
 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
     inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
     inet6 ::1/128 scope host
        valid_lft forever preferred_lft forever
 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
 qlen 100
     link/ether 00:15:17:7a:6a:bc brd ff:ff:ff:ff:ff:ff
     inet 88.162.31.82/24 brd 88.162.31.255 scope global eth0
     inet6 fe80::215:17ff:fe7a:6abc/64 scope link
        valid_lft forever preferred_lft forever
 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
 qlen 100
     link/ether 00:15:17:7a:6a:bd brd ff:ff:ff:ff:ff:ff
     inet 83.142.149.102/30 brd 83.142.149.103 scope global eth1
     inet6 fe80::215:17ff:fe7a:6abd/64 scope link
        valid_lft forever preferred_lft forever
 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
 qlen 1000
     link/ether 00:15:17:7a:6a:50 brd ff:ff:ff:ff:ff:ff
     inet 192.168.2.1/24 brd 192.168.2.255 scope global eth2
     inet6 fe80::215:17ff:fe7a:6a50/64 scope link
        valid_lft forever preferred_lft forever
 5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
     link/ether 00:15:17:7a:6a:51 brd ff:ff:ff:ff:ff:ff
 6: eth4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
 qlen 1000
     link/ether 00:1e:4f:3e:29:8e brd ff:ff:ff:ff:ff:ff
     inet 192.168.1.200/24 brd 192.168.1.255 scope global eth4
     inet6 fe80::21e:4fff:fe3e:298e/64 scope link
        valid_lft forever preferred_lft forever
 7: eth5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
     link/ether 00:1e:4f:3e:29:8f brd ff:ff:ff:ff:ff:ff
 8: teql0: <NOARP> mtu 1500 qdisc noop qlen 100
     link/void

 #ip route show
 83.142.149.100/30 dev eth1  proto kernel  scope link  src 83.142.149.102
 88.162.31.0/24 dev eth0  proto kernel  scope link  src 88.162.31.82
 192.168.2.0/24 dev eth2  proto kernel  scope link  src 192.168.2.1
 192.168.1.0/24 dev eth4  proto kernel  scope link  src 192.168.1.200
 default
         nexthop via 88.162.31.254  dev eth0 weight 1
         nexthop via 83.142.149.101  dev eth1 weight 1
         nexthop via 192.168.2.200  dev eth2 weight 1


 And here is my providers file :

 #NAME  NUMBER  MARK    DUPLICATE       INTERFACE       GATEWAY        
 OPTIONS         COPY
 ISP1   200     1       main            eth0            88.162.31.254  
 track,balance   eth4
 ISP2   201     2       main            eth1            83.142.149.101 
 track,balance   eth4
 ISP3   202     3       main            eth2            192.168.2.200  
 track,balance   eth4
 #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE


 Thank you for your help


 -------------------------------------------------------------------------
 This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
 Build the coolest Linux based applications with Moblin SDK & win great prizes
 Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
 _______________________________________________
 Shorewall-users mailing list
 Shorewall-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/shorewall-users


-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Shorewall-users mailing list
Shorewall-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/shorewall-users

Reply via email to