Hello Folks I need some advice on implementing the simple bridge setup that is mentioned in the shorewall doc's.
I am trying to follow the instructions for the case where there is no need to control the traffic on the bridge but am getting some unexpected results. In my case I am trying to bridge my wired and wireless networks together on one network and then let shorewall control the access to the internet. My interfaces are - Eth0 - Internet Eth1 - Wired Lan Ath0 - Wireless Lan From what I have read the fact that I have a wireless segment really has no real impact on the configuration - is that really correct? When I follow the instructions and use the two interface firewall out of the box with only making changes to the interfaces as described I get an error message when it tries to compile the SNAT - Unable to determine routes thru Eth1. I found some documentation elsewhere on the net where someone was trying to achieve the same network configuration and they made a change to the masq file and replaced it with ath0 br0. However, this also produced an error message - unknown interface ath0. For this configuration to work what is the correct configuration for the masq file? Shorewall is being hosted on Bearing uClibc version 3.1 Thanks in advance for any help, JD ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
