On Wednesday 06 April 2011 09:48:42 Cameron, George G. wrote: > Tom, > > 1. shorewall.tar.gz attached (including generated caps file) as > requested 2. I noticed that I was still using shorewall.conf from 4.4.18.1, > so swapped to the new conf file: > 1. now, no error is reported - but this appears to be because > OPTIMIZE=0 has now been made the default > 2. OPTIMIZE=4 results in the error report as before; other bits > (e.g. OPTIMIZE=11) do not > 3. however, REDIRECT still does not appear to be working, with > or without the OPTIMIZE bit that results in the error report > 3. I have some experience with iptables-based firewalls, but would > not claim to be 'expert'. Is it correct that in 'shorewall show -t > nat', the dnat chain (which references net_dnat) should show 0 > references? > > > And of course, many thanks again for taking a look. > > George > > On 05/04/2011 16:49, Tom Eastep wrote:
George I have recreated both problems. They seem to be caused by the parameter 'physical=+' in the interfaces file. If the parameter is removed or its value changed to a value other than just '+' the problems do not occur. Steven. ------------------------------------------------------------------------------ Xperia(TM) PLAY It's a major breakthrough. An authentic gaming smartphone on the nation's most reliable network. And it wants your games. http://p.sf.net/sfu/verizon-sfdev _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
