Greetings, I am attempting to configure a remote connection to an internal Server with a fw behind a gw shorewall fw using multiple ip-addresses. The gw shorewall uses the three-interface configuration. Excerpts are as follows ...
GW: (net=eth0) rule: SSH(ACCEPT):info net:ip.add.re.ss dmz:10.10.11.4 nat: 1x.xxx.x.104 eth0 10.10.11.4 No No Server: (dmz=eth2) rule: ACCEPT dmz:ip.add.re.ss $FW tcp 22 - 1x.xxx.xx.104 masq: eth2 10.10.11.4 12.xxx.xx.104 tcp 22 On Server, "tcpdump -i eth2 src ip.add.re.ss and dst 10.10.11.4 and port 22" shows traffic arriving from remote ip.add.re.ss but connection timesout. I would greatly appreciate a nudge into right direction. Also, should I remove SSHKnock on GW Shorewall until I get this to work? Thanks in advance. ------------------------------------------------------------------------------ Cloud Computing - Latest Buzzword or a Glimpse of the Future? This paper surveys cloud computing today: What are the benefits? Why are businesses embracing it? What are its payoffs and pitfalls? http://www.accelacomm.com/jaw/sdnl/114/51425149/ _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
