Hi everyone! I need some help with a four interface shorewal. I have two ISPs (eth0 and eth1), a DMZ (eth2) and a local subnet (eth3). I configured the providers file with the two ISPs. Internet access is working fine.
On eth3, I have two different subnets: 10.50.105.0/25 and 10.50.3.0/24. The eth3 interface is configured with the IP 10.50.105.88 and it is reaching all this network (can ping other hosts on the same network). However I can't access any host on 10.50.3.0/24. The only way I fixed it was disabling the firewall and adding a static route using 10.50.3.253 as gateway. I can't use this configuration because I loose external access and our system stops working. If I add this route manually when shorewall is up, I loose the external access too. Is there anyway I can add this route on shorewall configuration to startup automatically? Best regards! João K.
------------------------------------------------------------------------------
_______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
