2015-09-18 19:54 GMT+03:00 Tom Eastep <teas...@shorewall.net>: > On 09/18/2015 07:02 AM, SancheZZS . wrote: >> Hi all, >> >> I get warnings during start shorewall >> >> * Starting shorewall ... >> WARNING: Interface id3 is not usable -- Provider ISP1 (1) not Started >> WARNING: Interface ppp0 is not usable -- Provider ISP2 (2) not Started >> WARNING: No Default route added (all 'balance' providers are down) >> >> >> I dont understand whats happens? Any advice is greatly appreciated. >> >> >> # ls /proc/sys/net/ipv4/conf >> all default eth0 eth0.13 eth0.15 eth0.16 eth0.17 eth0.18 >> eth0.19 id10 id11 id12 id13 id2 id3 id4 id5 id6 id7 id8 >> id9 lo ppp0 >> >> # cat providers >> #NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY >> OPTIONS COPY >> ISP1 1 1 - id3 2.2.2.9 track,balance=1 >> ISP2 2 2 - ppp0 8.8.4.8 track,balance=2 >> >> # cat interfaces >> #ZONE INTERFACE OPTIONS >> wan1 id3 wait=10,optional >> wan2 ppp+ wait=10,dhcp,optional >> offc id5 dhcp >> tech eth0 dhcp >> gb id6 dhcp >> www id7 dhcp >> cltl id4 dhcp,optional >> cntk id8 dhcp,optional >> >> >> shorewall 4.6.10.1 > > shorewall enable ISP1 > shorewall enable ISP2 > > Let us know what happens. > > -Tom > --
Its work fine. After this 'shorewall start' works too. It's a magical solution. Thanks! ------------------------------------------------------------------------------ _______________________________________________ Shorewall-users mailing list Shorewall-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/shorewall-users
