On Wed, 11 Oct 2017, Tom Eastep wrote:
On 10/10/2017 10:18 AM, Paolo wrote:
I think it is a FAQ as configuration problem, but I can't have it
working in my installation (a very similar configuration works fine for
other 2 couple of nets)
Situation:
_________ NET _______
/ a.b.c.d \ e.f.g.h
RTR-FW1 RTR-FW2
/ \
/ 192.168.189.1/24 \ 192.168.117.5/24
LinuxGW1 (10.8.0.1/24) LinuxGW2 (10.8.0.2/24)
| 10.0.0.250/24 | 192.168.107.5/24
/ \ / \
Win11 Lin12 Win21 Win22
Obviously I want the servers into the 2 LANs behind the LinuxGW1 & 2 can
freely communicate.
At the moment I have that from LinuxGW2 I can reach all the hosts in
LAN1, but from the hosts in LAN2 (that have LinuxGW2 as default GW), I
can't reach LAN1. And LAN1 can't reach LAN2
If I install an OpenVPN client into Win21 or Win22 I can access the LAN1
without problems
LinuxGW1 & 2 are Debian 9 + openvpn. I use 10.8.0.0/24 for the tunnel
From LAN2 I can ping 10.8.0.2, but not 10.8.0.1
From LAN1 I can ping both 10.8.0.1 and 10.8.0.2
I am missing something but can't understand what.
Any hints appreciated.
Below configs.
If you 'shorewall clear' on both firewalls, can you communicate between
the two LANs? (be sure to 'shorewall start' both after the test).
No.
Tried to flip the roles/configuration opf openvpn, same result.
--
Thanks,
Paolo
____________________________________________
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users
