On 25 June 2010 14:09, Martin Jansa <[email protected]> wrote:
>> Some work-in-progress stuff was accidentaly rsynced to public feeds
>> yesterday..
>>
>> so if you want working Xorg, don't opkg upgrade now, I'll reply here as
>> soon as I finish my changes and rsync it to working and tested state.
>>
>> Sorry for inconvenience ( I guess that everybody will read this only
>> _after_ failed opkg upgrade ;/ - so I'll remove feeds for today..)
>>
>> Regards,
>
> There is workaround for those who opkg upgraded between 23:00 CEST
> yesterday and today morning when I renamed ipk dir..
>
> You can install any kernel from
> http://build.shr-project.org/shr-kms/
> and follow the instructions there. 2.6.32 are known to work (except that
> some people see white screen on some occassions).
I haven't got any 2.6.32 kernel to work, the X-server always crashes.
This is with the latest 2.6.32.13 from the above page just some
minutes ago (full logfile attached):
...
[1875919.543] (**) Option "CustomKeycodes" "off"
[1875919.545] (**) <default keyboard>: CustomKeycodes disabled
[1875919.553] (II) XINPUT: Adding extended input device "<default
keyboard>" (type: KEYBOARD)
[1875930.859]
Backtrace:
[1875931.143] Segmentation fault at address 0x2761750
[1875931.145]
Fatal server error:
[1875931.155] Caught signal 11 (Segmentation fault). Server aborting
[1875931.176]
[1875931.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[1875931.180] Please also check the log file at "/var/log/Xorg.0.log"
for additional information.
[1875931.201]
[1875931.216] (II) Power Button: Close
[1875931.223] (II) UnloadModule: "evdev"
[1875931.226] (II) AUX Button: Close
...
[1875903.127]
X.Org X Server 1.8.1
Release Date: 2010-05-11
[1875903.145] X Protocol Version 11, Revision 0
[1875903.147] Build Operating System: Linux 2.6.26-2-xen-amd64 x86_64
[1875903.149] Current Operating System: Linux gta02v6 2.6.32.13 #1 PREEMPT Tue Jun 8 11:30:26 CEST 2010 armv4tl
[1875903.151] Kernel command line: rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0 loglevel=8 regular_boot mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)
[1875903.162] Build Date: 13 May 2010 01:05:53AM
[1875903.165]
[1875903.166] Current version of pixman: 0.18.0
[1875903.173] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[1875903.175] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[1875903.200] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 25 17:53:10 2010
[1875903.212] (==) Using config file: "/etc/X11/xorg.conf"
[1875903.222] (==) ServerLayout "Default Layout"
[1875903.224] (**) |-->Screen "Default Screen" (0)
[1875903.231] (**) | |-->Monitor "LCD Panel"
[1875903.309] (**) | |-->Device "Glamo Graphics Chip"
[1875903.348] (**) |-->Input Device "Power Button"
[1875903.350] (**) |-->Input Device "AUX Button"
[1875903.362] (**) |-->Input Device "Touchscreen"
[1875903.364] (==) Not automatically adding devices
[1875903.376] (==) Not automatically enabling devices
[1875903.433] (==) FontPath set to:
/usr/share/fonts/X11/misc
[1875903.436] (==) ModulePath set to "/usr/lib/xorg/modules"
[1875903.443] (==) |-->Input Device "Power Button"
[1875903.445] (==) |-->Input Device "<default keyboard>"
[1875903.452] (==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
[1875903.454] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[1875903.462] (II) Loader magic: 0x11b998
[1875903.463] (II) Module ABI versions:
[1875903.465] X.Org ANSI C Emulation: 0.4
[1875903.467] X.Org Video Driver: 7.0
[1875903.468] X.Org XInput driver : 9.0
[1875903.471] X.Org Server Extension : 3.0
[1875903.532] (II) "extmod" will be loaded by default.
[1875903.534] (II) "dbe" will be loaded by default.
[1875903.535] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[1875903.537] (II) "record" will be loaded by default.
[1875903.539] (II) "dri" will be loaded by default.
[1875903.546] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[1875903.549] (II) LoadModule: "glx"
[1875903.809] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[1875904.529] (II) Module glx: vendor="X.Org Foundation"
[1875904.613] compiled for 1.8.1, module version = 1.0.0
[1875904.615] ABI class: X.Org Server Extension, version 3.0
[1875904.642] (==) AIGLX enabled
[1875904.644] (II) Loading extension GLX
[1875904.667] (II) LoadModule: "dri2"
[1875904.779] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[1875905.273] (II) Module dri2: vendor="X.Org Foundation"
[1875905.298] compiled for 1.8.1, module version = 1.2.0
[1875905.301] ABI class: X.Org Server Extension, version 3.0
[1875905.484] (II) Loading extension DRI2
[1875905.486] (II) LoadModule: "extmod"
[1875905.547] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[1875905.647] (II) Module extmod: vendor="X.Org Foundation"
[1875905.669] compiled for 1.8.1, module version = 1.0.0
[1875905.808] Module class: X.Org Server Extension
[1875905.809] ABI class: X.Org Server Extension, version 3.0
[1875905.817] (II) Loading extension MIT-SCREEN-SAVER
[1875905.853] (II) Loading extension XFree86-VidModeExtension
[1875905.854] (II) Loading extension XFree86-DGA
[1875905.872] (II) Loading extension DPMS
[1875905.874] (II) Loading extension XVideo
[1875905.876] (II) Loading extension XVideo-MotionCompensation
[1875906.099] (II) Loading extension X-Resource
[1875906.106] (II) LoadModule: "dbe"
[1875906.139] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[1875906.167] (II) Module dbe: vendor="X.Org Foundation"
[1875906.173] compiled for 1.8.1, module version = 1.0.0
[1875906.185] Module class: X.Org Server Extension
[1875906.203] ABI class: X.Org Server Extension, version 3.0
[1875906.205] (II) Loading extension DOUBLE-BUFFER
[1875906.221] (II) LoadModule: "record"
[1875906.232] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[1875906.264] (II) Module record: vendor="X.Org Foundation"
[1875906.266] compiled for 1.8.1, module version = 1.13.0
[1875906.280] Module class: X.Org Server Extension
[1875906.283] ABI class: X.Org Server Extension, version 3.0
[1875906.285] (II) Loading extension RECORD
[1875906.297] (II) LoadModule: "dri"
[1875906.383] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[1875907.031] (II) Module dri: vendor="X.Org Foundation"
[1875907.324] compiled for 1.8.1, module version = 1.0.0
[1875907.368] ABI class: X.Org Server Extension, version 3.0
[1875907.397] (II) Loading extension XFree86-DRI
[1875907.400] (II) LoadModule: "glamo"
[1875907.429] (II) Loading /usr/lib/xorg/modules/drivers/glamo_drv.so
[1875907.764] (II) Module Glamo: vendor="X.Org Foundation"
[1875908.141] compiled for 1.8.1, module version = 0.4.0
[1875908.149] ABI class: X.Org Video Driver, version 7.0
[1875908.157] (II) LoadModule: "evdev"
[1875909.234] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[1875909.261] (II) Module evdev: vendor="X.Org Foundation"
[1875909.278] compiled for 1.8.1, module version = 2.4.0
[1875909.280] Module class: X.Org XInput Driver
[1875909.297] ABI class: X.Org XInput driver, version 9.0
[1875909.299] (II) LoadModule: "kbd"
[1875909.312] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[1875909.341] (II) Module kbd: vendor="X.Org Foundation"
[1875909.343] compiled for 1.8.1, module version = 1.4.0
[1875909.345] Module class: X.Org XInput Driver
[1875909.372] ABI class: X.Org XInput driver, version 9.0
[1875909.374] (II) Glamo: driver for glamo: Glamo
[1875909.392] (--) using VT number 2
[1875909.676] (WW) Falling back to old probe method for Glamo
[1875909.809] (II) Using KMS!
[1875909.821] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[1875909.838] (II) Running in FRAMEBUFFER Mode
[1875909.840] drmOpenDevice: node name is /dev/dri/card0
[1875909.853] drmOpenDevice: open result is 8, (OK)
[1875909.855] drmOpenByBusid: Searching for BusID platform:glamo-fb
[1875909.882] drmOpenDevice: node name is /dev/dri/card0
[1875909.884] drmOpenDevice: open result is 8, (OK)
[1875909.921] drmOpenByBusid: drmOpenMinor returns 8
[1875909.927] drmOpenByBusid: drmGetBusid reports platform:glamo-fb
[1875909.946] (II) Glamo(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 16/16
[1875910.357] (==) Glamo(0): Depth 16, (==) framebuffer bpp 16
[1875910.359] (==) Glamo(0): RGB weight 565
[1875910.366] (==) Glamo(0): Default visual is TrueColor
[1875911.095] VALUES 0
[1875911.529] VALUES 4
[1875911.530] DPMS 0
[1875911.542] DPMS 1
[1875911.544] DPMS 2
[1875911.545] DPMS 3
[1875911.563] (II) Glamo(0): Output LVDS using monitor section LCD Panel
[1875911.572] (II) Glamo(0): Modeline "480x640"x72.5 24.50 480 496 504 512 640 656 658 660 (47.9 kHz)
[1875911.574] (II) Glamo(0): Modeline "240x320"x264.9 24.50 240 256 264 272 320 336 338 340 (90.1 kHz)
[1875911.589] (II) Glamo(0): Not using default mode "640x350" (width too large for virtual size)
[1875911.602] (II) Glamo(0): Not using default mode "320x175" (doublescan mode not supported)
[1875911.613] (II) Glamo(0): Not using default mode "640x400" (width too large for virtual size)
[1875911.618] (II) Glamo(0): Not using default mode "320x200" (doublescan mode not supported)
[1875911.622] (II) Glamo(0): Not using default mode "720x400" (width too large for virtual size)
[1875911.625] (II) Glamo(0): Not using default mode "360x200" (doublescan mode not supported)
[1875911.635] (II) Glamo(0): Not using default mode "640x480" (width too large for virtual size)
[1875911.651] (II) Glamo(0): Not using default mode "320x240" (doublescan mode not supported)
[1875911.654] (II) Glamo(0): Not using default mode "640x480" (width too large for virtual size)
[1875911.661] (II) Glamo(0): Not using default mode "320x240" (doublescan mode not supported)
[1875911.673] (II) Glamo(0): Not using default mode "640x480" (width too large for virtual size)
[1875911.674] (II) Glamo(0): Not using default mode "320x240" (doublescan mode not supported)
[1875911.687] (II) Glamo(0): Not using default mode "640x480" (width too large for virtual size)
[1875911.690] (II) Glamo(0): Not using default mode "320x240" (doublescan mode not supported)
[1875911.692] (II) Glamo(0): Not using default mode "800x600" (width too large for virtual size)
[1875911.694] (II) Glamo(0): Not using default mode "400x300" (doublescan mode not supported)
[1875911.707] (II) Glamo(0): Not using default mode "800x600" (width too large for virtual size)
[1875911.710] (II) Glamo(0): Not using default mode "400x300" (doublescan mode not supported)
[1875911.724] (II) Glamo(0): Not using default mode "800x600" (width too large for virtual size)
[1875911.727] (II) Glamo(0): Not using default mode "400x300" (doublescan mode not supported)
[1875911.729] (II) Glamo(0): Not using default mode "800x600" (width too large for virtual size)
[1875911.736] (II) Glamo(0): Not using default mode "400x300" (doublescan mode not supported)
[1875911.738] (II) Glamo(0): Not using default mode "800x600" (width too large for virtual size)
[1875911.740] (II) Glamo(0): Not using default mode "400x300" (doublescan mode not supported)
[1875911.762] (II) Glamo(0): Not using default mode "1024x768i" (interlace mode not supported)
[1875911.765] (II) Glamo(0): Not using default mode "512x384i" (doublescan mode not supported)
[1875911.776] (II) Glamo(0): Not using default mode "1024x768" (height too large for virtual size)
[1875911.778] (II) Glamo(0): Not using default mode "512x384" (doublescan mode not supported)
[1875911.780] (II) Glamo(0): Not using default mode "1024x768" (height too large for virtual size)
[1875911.798] (II) Glamo(0): Not using default mode "512x384" (doublescan mode not supported)
[1875911.800] (II) Glamo(0): Not using default mode "1024x768" (height too large for virtual size)
[1875911.817] (II) Glamo(0): Not using default mode "512x384" (doublescan mode not supported)
[1875911.818] (II) Glamo(0): Not using default mode "1024x768" (height too large for virtual size)
[1875911.820] (II) Glamo(0): Not using default mode "512x384" (doublescan mode not supported)
[1875911.828] (II) Glamo(0): Not using default mode "1152x864" (height too large for virtual size)
[1875911.830] (II) Glamo(0): Not using default mode "576x432" (doublescan mode not supported)
[1875911.853] (II) Glamo(0): Not using default mode "1280x960" (height too large for virtual size)
[1875911.856] (II) Glamo(0): Not using default mode "640x480" (doublescan mode not supported)
[1875912.465] (II) Glamo(0): Not using default mode "1280x960" (height too large for virtual size)
[1875912.482] (II) Glamo(0): Not using default mode "640x480" (doublescan mode not supported)
[1875912.483] (II) Glamo(0): Not using default mode "1280x1024" (height too large for virtual size)
[1875912.485] (II) Glamo(0): Not using default mode "640x512" (doublescan mode not supported)
[1875912.498] (II) Glamo(0): Not using default mode "1280x1024" (height too large for virtual size)
[1875912.516] (II) Glamo(0): Not using default mode "640x512" (doublescan mode not supported)
[1875912.519] (II) Glamo(0): Not using default mode "1280x1024" (height too large for virtual size)
[1875912.526] (II) Glamo(0): Not using default mode "640x512" (doublescan mode not supported)
[1875912.530] (II) Glamo(0): Not using default mode "1600x1200" (height too large for virtual size)
[1875912.546] (II) Glamo(0): Not using default mode "800x600" (doublescan mode not supported)
[1875912.549] (II) Glamo(0): Not using default mode "1600x1200" (height too large for virtual size)
[1875912.568] (II) Glamo(0): Not using default mode "800x600" (doublescan mode not supported)
[1875912.570] (II) Glamo(0): Not using default mode "1600x1200" (height too large for virtual size)
[1875912.587] (II) Glamo(0): Not using default mode "800x600" (doublescan mode not supported)
[1875912.589] (II) Glamo(0): Not using default mode "1600x1200" (height too large for virtual size)
[1875912.606] (II) Glamo(0): Not using default mode "800x600" (doublescan mode not supported)
[1875912.608] (II) Glamo(0): Not using default mode "1600x1200" (height too large for virtual size)
[1875912.610] (II) Glamo(0): Not using default mode "800x600" (doublescan mode not supported)
[1875912.623] (II) Glamo(0): Not using default mode "1792x1344" (height too large for virtual size)
[1875912.636] (II) Glamo(0): Not using default mode "896x672" (doublescan mode not supported)
[1875912.644] (II) Glamo(0): Not using default mode "1792x1344" (height too large for virtual size)
[1875912.662] (II) Glamo(0): Not using default mode "896x672" (doublescan mode not supported)
[1875912.664] (II) Glamo(0): Not using default mode "1856x1392" (height too large for virtual size)
[1875912.682] (II) Glamo(0): Not using default mode "928x696" (doublescan mode not supported)
[1875912.684] (II) Glamo(0): Not using default mode "1856x1392" (height too large for virtual size)
[1875912.692] (II) Glamo(0): Not using default mode "928x696" (doublescan mode not supported)
[1875912.694] (II) Glamo(0): Not using default mode "1920x1440" (height too large for virtual size)
[1875912.695] (II) Glamo(0): Not using default mode "960x720" (doublescan mode not supported)
[1875912.713] (II) Glamo(0): Not using default mode "1920x1440" (height too large for virtual size)
[1875912.716] (II) Glamo(0): Not using default mode "960x720" (doublescan mode not supported)
[1875912.730] (II) Glamo(0): Not using default mode "832x624" (width too large for virtual size)
[1875912.738] (II) Glamo(0): Not using default mode "416x312" (doublescan mode not supported)
[1875912.746] (II) Glamo(0): Not using default mode "1400x1050" (height too large for virtual size)
[1875912.753] (II) Glamo(0): Not using default mode "700x525" (doublescan mode not supported)
[1875912.755] (II) Glamo(0): Not using default mode "1400x1050" (height too large for virtual size)
[1875912.771] (II) Glamo(0): Not using default mode "700x525" (doublescan mode not supported)
[1875912.773] (II) Glamo(0): Not using default mode "1920x1440" (height too large for virtual size)
[1875912.781] (II) Glamo(0): Not using default mode "960x720" (doublescan mode not supported)
[1875912.804] (II) Glamo(0): Not using default mode "2048x1536" (height too large for virtual size)
[1875912.816] (II) Glamo(0): Not using default mode "1024x768" (doublescan mode not supported)
[1875912.823] (II) Glamo(0): Not using default mode "2048x1536" (height too large for virtual size)
[1875912.825] (II) Glamo(0): Not using default mode "1024x768" (doublescan mode not supported)
[1875912.834] (II) Glamo(0): Not using default mode "2048x1536" (height too large for virtual size)
[1875912.851] (II) Glamo(0): Not using default mode "1024x768" (doublescan mode not supported)
[1875912.853] (II) Glamo(0): Printing probed modes for output LVDS
[1875912.855] (II) Glamo(0): Modeline "480x640"x72.5 24.50 480 496 504 512 640 656 658 660 (47.9 kHz)
[1875912.870] (II) Glamo(0): Modeline "240x320"x264.9 24.50 240 256 264 272 320 336 338 340 (90.1 kHz)
[1875912.882] (II) Glamo(0): Output LVDS connected
[1875912.883] (II) Glamo(0): Using sloppy heuristic for initial modes
[1875912.885] (II) Glamo(0): Output LVDS using initial mode 480x640
[1875912.899] (II) Glamo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[1875912.913] (++) Glamo(0): DPI set to (280, 280)
[1875912.915] (II) Loading sub module "fb"
[1875912.931] (II) LoadModule: "fb"
[1875913.043] (II) Loading /usr/lib/xorg/modules/libfb.so
[1875913.216] (II) Module fb: vendor="X.Org Foundation"
[1875913.234] compiled for 1.8.1, module version = 1.0.0
[1875913.248] ABI class: X.Org ANSI C Emulation, version 0.4
[1875913.249] (II) Loading sub module "exa"
[1875913.268] (II) LoadModule: "exa"
[1875913.271] (II) Loading /usr/lib/xorg/modules/libexa.so
[1875913.428] (II) Module exa: vendor="X.Org Foundation"
[1875913.430] compiled for 1.8.1, module version = 2.5.0
[1875913.444] ABI class: X.Org Video Driver, version 7.0
[1875913.456] (II) Loading sub module "dri2"
[1875913.463] (II) LoadModule: "dri2"
[1875913.478] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[1875913.626] (II) Glamo(0): EXA hardware acceleration initialising
[1875913.629] (II) Glamo(0): Using mixed mode pixmaps
[1875913.637] (II) EXA(0): Driver allocated offscreen pixmaps
[1875913.651] (II) EXA(0): Driver registered support for the following operations:
[1875913.655] (II) Solid
[1875913.658] (II) Copy
[1875913.659] (II) Composite (RENDER acceleration)
[1875913.667] (II) Glamo(0): Initialized EXA acceleration
[1875913.670] (==) Glamo(0): Backing store disabled
[1875913.682] (==) Glamo(0): Silken mouse enabled
[1875913.685] (II) Glamo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[1875913.693] (==) Glamo(0): DPMS enabled
[1875913.696] (II) Glamo(0): [glamo-dri] Name of DRM device is '/dev/dri/card0'
[1875913.708] (II) Glamo(0): [DRI2] Setup complete
[1875913.718] (II) Glamo(0): [DRI2] DRI driver: glamo
[1875913.737] (II) Glamo(0): [glamo-dri] DRI2 initialisation succeeded
[1875913.739] (--) RandR disabled
[1875913.746] (II) Initializing built-in extension Generic Event Extension
[1875913.752] (II) Initializing built-in extension SHAPE
[1875913.754] (II) Initializing built-in extension MIT-SHM
[1875913.761] (II) Initializing built-in extension XInputExtension
[1875913.776] (II) Initializing built-in extension XTEST
[1875913.782] (II) Initializing built-in extension BIG-REQUESTS
[1875913.784] (II) Initializing built-in extension SYNC
[1875913.797] (II) Initializing built-in extension XKEYBOARD
[1875913.798] (II) Initializing built-in extension XC-MISC
[1875913.800] (II) Initializing built-in extension XFIXES
[1875913.811] (II) Initializing built-in extension RENDER
[1875913.813] (II) Initializing built-in extension RANDR
[1875913.815] (II) Initializing built-in extension COMPOSITE
[1875913.827] (II) Initializing built-in extension DAMAGE
[1875914.883] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[1875914.885] (II) AIGLX: enabled GLX_INTEL_swap_event
[1875914.893] (II) AIGLX: Loaded and initialized /usr/lib/dri/glamo_dri.so
[1875914.901] (II) GLX: Initialized DRI2 GL provider for screen 0
[1875915.001] (II) Glamo(0): Adding FB: 8 480 640 16 16 960
[1875915.166] (II) Glamo(0): Setting screen physical size to 43 x 58
[1875917.667] (**) Power Button: always reports core events
[1875917.678] (**) Power Button: Device: "/dev/input/event0"
[1875917.681] (II) Power Button: Found keys
[1875917.687] (II) Power Button: Configuring as keyboard
[1875917.689] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[1875917.697] (**) Option "xkb_rules" "evdev"
[1875917.699] (**) Option "xkb_model" "evdev"
[1875917.702] (**) Option "xkb_layout" "us"
[1875918.877] (**) AUX Button: always reports core events
[1875918.879] (**) AUX Button: Device: "/dev/input/event2"
[1875918.886] (II) AUX Button: Found keys
[1875919.237] (II) AUX Button: Configuring as keyboard
[1875919.239] (II) XINPUT: Adding extended input device "AUX Button" (type: KEYBOARD)
[1875919.240] (**) Option "xkb_rules" "evdev"
[1875919.267] (**) Option "xkb_model" "evdev"
[1875919.269] (**) Option "xkb_layout" "us"
[1875919.286] (**) Touchscreen: always reports core events
[1875919.293] (**) Touchscreen: Device: "/dev/input/event1"
[1875919.304] (II) Touchscreen: Found absolute axes
[1875919.311] (II) Touchscreen: Found x and y absolute axes
[1875919.315] (II) Touchscreen: Found absolute touchscreen
[1875919.318] (II) Touchscreen: Configuring as touchscreen
[1875919.319] (**) Touchscreen: YAxisMapping: buttons 4 and 5
[1875919.331] (**) Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1875919.354] (II) XINPUT: Adding extended input device "Touchscreen" (type: TOUCHSCREEN)
[1875919.373] (II) Touchscreen: initialized for absolute axes.
[1875919.388] (**) Option "CorePointer"
[1875919.393] (**) Power Button: always reports core events
[1875919.401] (**) Power Button: Device: "/dev/input/event0"
[1875919.407] (WW) Power Button: device file already in use. Ignoring.
[1875919.409] (II) UnloadModule: "evdev"
[1875919.421] (EE) PreInit returned NULL for "Power Button"
[1875919.432] (**) Option "CoreKeyboard"
[1875919.445] (**) <default keyboard>: always reports core events
[1875919.454] (**) Option "Protocol" "standard"
[1875919.466] (**) <default keyboard>: Protocol: standard
[1875919.494] (**) Option "XkbRules" "base"
[1875919.502] (**) <default keyboard>: XkbRules: "base"
[1875919.519] (**) Option "XkbModel" "pc105"
[1875919.527] (**) <default keyboard>: XkbModel: "pc105"
[1875919.529] (**) Option "XkbLayout" "us"
[1875919.531] (**) <default keyboard>: XkbLayout: "us"
[1875919.543] (**) Option "CustomKeycodes" "off"
[1875919.545] (**) <default keyboard>: CustomKeycodes disabled
[1875919.553] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
[1875930.859]
Backtrace:
[1875931.143] Segmentation fault at address 0x2761750
[1875931.145]
Fatal server error:
[1875931.155] Caught signal 11 (Segmentation fault). Server aborting
[1875931.176]
[1875931.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[1875931.180] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[1875931.201]
[1875931.216] (II) Power Button: Close
[1875931.223] (II) UnloadModule: "evdev"
[1875931.226] (II) AUX Button: Close
[1875931.235] (II) UnloadModule: "evdev"
[1875931.253] (II) Touchscreen: Close
[1875931.254] (II) UnloadModule: "evdev"
[1875931.272] (II) UnloadModule: "kbd"
_______________________________________________
Shr-devel mailing list
[email protected]
http://lists.shr-project.org/mailman/listinfo/shr-devel
