On Sun, May 15, 2011 at 01:06:58PM +0200, Sebastian Görgen wrote: > Dear JaMa, > > I've changed also to your testing repo.
Thanks :) > I've seen the following things: > > First the downsides: > > 2.6.37 seems to be more critical on bad blocks in NAND. With 2.6.34 I used > the > NAND both with ubifs and jffs without any issues. Now with 2.6.37 I'll get > error message like "ecc checksum error", I/O errors and so on. I had to > change > to boot from SD Card to get testing working Are you sure it's caused by 2.6.37? did you also reflash new rootfs or only changed kernel and opkg upgraded? because lately there were many reports of ubifs/jffs2 not working after writting it with dfu-util, I'm using nandwrite and both images ubifs/jffs2 are working for me. GNUtoo reported that he had working images written with dfu-util only after running nand scrub http://wiki.openmoko.org/wiki/NAND_bad_blocks#Clearing_BadBlocks Cheers, > No power button LED lights to indicate charging or full > GTA02 suspends even though USB cable is plugged in as Neil already mentioned. > Also Illumne Battery applet doesn't indicate state "loading" anymore > > I still can't dim the backlight down via settings -> Power -> Backlight. > There > is seems that there is only backlight on/off included > > But there is a big plus: > > Battery usage went down a lot. 12 h of Standby took me only 8% Battery > capacity. > > Working things: > GPS, Telephony, SMS > > As I'll changed from NAND to SD card I can't say anything about performance.. > > Regards, > > Sebastian > _______________________________________________ > Shr-devel mailing list > [email protected] > http://lists.shr-project.org/mailman/listinfo/shr-devel -- Martin 'JaMa' Jansa jabber: [email protected]
pgpcSctlJHc42.pgp
Description: PGP signature
_______________________________________________ Shr-devel mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-devel
