Hey everyone,
I just got setup with SHR and I love it! Most everything works out of
the box. Just one thing I'm working on and that's getting a command to
run over SSH. What I want to do is set up a script on my laptop that
will issue the following commands to the gta02:
1) power on the bluetooth
2) sdptool add SP
3) rfcomm -r watch 0 1 sh -c "gpspipe -r >/dev/rfcomm0"
For the purpose of getting the Neo to route GPS NMEA data over
bluetooth. Then the script would fire up up the rfcomm on the laptop.
Everything works except step 3. For some reason when I use the command:
cmd | ssh r...@neo rfcomm -r watch 0 1 sh -c "gpspipe -r
>/dev/rfcomm0" &
it executes the command and starts two processes running on the neo:
2152 ? S 0:00 sh -c rfcomm -r watch 0 1 sh -c gpspipe -r
>/dev/rfcomm0
2155 ? S 0:00 rfcomm -r watch 0 1 sh -c gpspipe -r
Obviously the actual rfcomm command isn't routing the output
to /dev/rfcomm0. Any ideas how I can get this command to run properly?
Or if there's a forum or something I should be asking this on, let me
know and I'll try there.
Thanks guys,
Ronald Tallent
_______________________________________________
Shr-User mailing list
[email protected]
http://lists.shr-project.org/mailman/listinfo/shr-user
