
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-6-xen-amd64 x86_64 
Current Operating System: Linux om-gta02 2.6.29-GTA02_oma-andy-mokodev #2 Tue Jan 12 12:18:13 EET 2010 armv4tl
Kernel command line: rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 loglevel=8 regular_boot mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)
Build Date: 21 January 2010  11:32:32AM
 
Current version of pixman: 0.17.3
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 25 12:23:00 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "LCD Panel"
(**) |   |-->Device "Glamo Graphics Chip"
(**) |-->Input Device "Power Button"
(**) |-->Input Device "AUX Button"
(**) |-->Input Device "Touchscreen"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
	/usr/share/fonts/X11/misc
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x118960
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 1

(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glamo"
(II) Loading /usr/lib/xorg/modules/drivers/glamo_drv.so
(II) Module Glamo: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 0.4.0
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.3, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) Glamo: driver for glamo: Glamo
(WW) Falling back to old probe method for Glamo
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 0.0.2
	ABI class: X.Org Video Driver, version 6.0
(II) Not using KMS
(II) Glamo(0): using default device

(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Running in FRAMEBUFFER Mode
(II) Glamo(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 16/16
(==) Glamo(0): Depth 16, (==) framebuffer bpp 16
(==) Glamo(0): RGB weight 565
(==) Glamo(0): Default visual is TrueColor
(==) Glamo(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Glamo(0): Output LCD using monitor section LCD Panel
(II) Glamo(0): Output LCD connected
(II) Glamo(0): Using exact sizes for initial modes
(II) Glamo(0): Output LCD using initial mode 480x640
(II) Glamo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) Glamo(0): hardware: SMedia Glamo (video memory: 4096kB)
(--) Glamo(0): Virtual size is 480x640 (pitch 480)
(**) Glamo(0):  Driver mode "480x640": 24.5 MHz (scaled from 0.0 MHz), 47.9 kHz, 72.5 Hz
(II) Glamo(0): Modeline "480x640"x72.5   24.50  480 496 504 512  640 656 658 660 (47.9 kHz)
(**) Glamo(0):  Driver mode "240x320": 24.5 MHz (scaled from 0.0 MHz), 33.1 kHz, 50.2 Hz
(II) Glamo(0): Modeline "240x320"x50.2   24.50  240 736 738 740  320 656 658 660 (33.1 kHz)
(++) Glamo(0): DPI set to (280, 280)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 2.5.0
	ABI class: X.Org Video Driver, version 6.0
(WW) Glamo(0): EXA hardware acceleration initialising
(II) EXA(0): Offscreen pixmap area of 3317760 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
Initialized EXA acceleration
(==) Glamo(0): Backing store disabled
(II) Glamo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) Glamo(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) Glamo(0): Setting screen physical size to 43 x 58
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) AUX Button: always reports core events
(**) AUX Button: Device: "/dev/input/event4"
(II) AUX Button: Found keys
(II) AUX Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "AUX Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Touchscreen: always reports core events
(**) Touchscreen: Device: "/dev/input/event1"
(II) Touchscreen: Found absolute axes
(II) Touchscreen: Found x and y absolute axes
(II) Touchscreen: Found absolute touchscreen
(II) Touchscreen: Configuring as touchscreen
(**) Touchscreen: YAxisMapping: buttons 4 and 5
(**) Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Touchscreen" (type: TOUCHSCREEN)
(**) Touchscreen: (accel) keeping acceleration scheme 1
(**) Touchscreen: (accel) acceleration profile 0
(II) Touchscreen: initialized for absolute axes.
(II) config/hal: Adding input device Neo1973 Buttons
(**) Neo1973 Buttons: always reports core events
(**) Neo1973 Buttons: Device: "/dev/input/event4"
(WW) Neo1973 Buttons: device file already in use. Ignoring.
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "Neo1973 Buttons"
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device PCF50633 PMU events
(**) PCF50633 PMU events: always reports core events
(**) PCF50633 PMU events: Device: "/dev/input/event0"
(WW) PCF50633 PMU events: device file already in use. Ignoring.
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "PCF50633 PMU events"
(EE) config/hal: NewInputDeviceRequest failed (8)
