good morning,
it is getting closer with the new package:
first I removed everything under .config/iliwi/
this is what I get now:
the gui shows the network and I can set it as preferred and enter the key
then however it stops in the stage of connecting.
here is the command line output
------------------------------------------------
iliwi
------------------------------------------------
** (process:275): CRITICAL **: dbus_g_proxy_new_for_name: assertion
`interface_name != NULL' failed
** (process:275): DEBUG: view_main.vala:140: BT: Entering method:
refresh_list_elements()
** (process:275): DEBUG: view_main.vala:143: BT: cleared wifilist
** (process:275): DEBUG: view_main.vala:156: BT: Visible networks:
** (process:275): CRITICAL **: g_file_stream_read_line: assertion `self !=
NULL' failed
** (process:275): DEBUG: view_main.vala:140: BT: Entering method:
refresh_list_elements()
** (process:275): DEBUG: view_main.vala:143: BT: cleared wifilist
** (process:275): DEBUG: view_main.vala:156: BT: Visible networks: WLAN-7BE401
kadersabek WLAN-333607
** (process:275): DEBUG: view_main.vala:161: BT: Entered: foreach
get_visible_networks, need to find place for network: WLAN-7BE401
** (process:275): DEBUG: view_main.vala:166: BT: List is empty, appending
WLAN-7BE401
** (process:275): DEBUG: view_main.vala:161: BT: Entered: foreach
get_visible_networks, need to find place for network: kadersabek
** (process:275): DEBUG: view_main.vala:172: BT: List is not empty, begin
sorting process
** (process:275): DEBUG: view_main.vala:175: BT: Got first item in list
WLAN-7BE401
** (process:275): DEBUG: view_main.vala:191: BT: kadersabek preference matches
WLAN-7BE401, doing insert before
** (process:275): DEBUG: view_main.vala:161: BT: Entered: foreach
get_visible_networks, need to find place for network: WLAN-333607
** (process:275): DEBUG: view_main.vala:172: BT: List is not empty, begin
sorting process
** (process:275): DEBUG: view_main.vala:175: BT: Got first item in list
kadersabek
** (process:275): DEBUG: view_main.vala:199: BT: Place not found, doing
item_append
** (process:275): DEBUG: view_main.vala:199: BT: Place not found, doing
item_append
Line 4: Invalid PSK ''.
Line 4: failed to parse psk ''.
Line 5: WPA-PSK accepted for key management, but no PSK configured.
Line 5: failed to parse network block.
Failed to read or parse configuration '/home/root/.config/iliwi
/wpa_supplicant.conf'.
Line 4: Invalid PSK 'govi*5600'.
Line 4: failed to parse psk 'govi*5600'.
Line 5: WPA-PSK accepted for key management, but no PSK configured.
Line 5: failed to parse network block.
Failed to read or parse configuration '/home/root/.config/iliwi
/wpa_supplicant.conf'.
** (process:275): DEBUG: view_main.vala:140: BT: Entering method:
refresh_list_elements()
** (process:275): DEBUG: view_main.vala:143: BT: cleared wifilist
** (process:275): DEBUG: view_main.vala:156: BT: Visible networks: WLAN-7BE401
kadersabek
** (process:275): DEBUG: view_main.vala:161: BT: Entered: foreach
get_visible_networks, need to find place for network: WLAN-7BE401
** (process:275): DEBUG: view_main.vala:166: BT: List is empty, appending
WLAN-7BE401
** (process:275): DEBUG: view_main.vala:161: BT: Entered: foreach
get_visible_networks, need to find place for network: kadersabek
** (process:275): DEBUG: view_main.vala:172: BT: List is not empty, begin
sorting process
** (process:275): DEBUG: view_main.vala:175: BT: Got first item in list
WLAN-7BE401
** (process:275): DEBUG: view_main.vala:183: BT: kadersabek is preferred AND
WLAN-7BE401 is not, doing insert before
------------------------------------------------
iwlist scan looks like
------------------------------------------------
eth0 Scan completed :
Cell 01 - Address: 00:26:4D:7B:E4:4D
ESSID:"WLAN-7BE401"
Mode:Master
Frequency:2.412 GHz (Channel 1)
Quality=13/94 Signal level=-82 dBm Noise level=-95 dBm
Encryption key:on
Extra:bcn_int=100
Extra:wpa_ie=dd1a0050f201...
Extra:rsn_ie=301801000...
Extra:wmm_ie=dd18005...
Extra:ath_ie=dd0900037f01010000ff7f
Cell 02 - Address: 00:04:0E:D3:EF:8A
ESSID:"kadersabek"
Mode:Master
Frequency:2.427 GHz (Channel 4)
Quality=36/94 Signal level=-59 dBm Noise level=-95 dBm
Encryption key:on
Extra:bcn_int=100
Extra:wpa_ie=dd180050f2010100...
Extra:rsn_ie=30140100000fac02010...
Extra:wmm_ie=dd180050f2020101..
------------------------------------------------
./config/iliwi/wpa_supplicant.conf
------------------------------------------------
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="kadersabek"
psk=govi*5600#12...@@@...
}
--- I changed a couple of characters to ... to have some privacy ;-)
------------------------------------------------
./config/iliwi/preferred.networks is not available
------------------------------------------------
NOW I SHUT DOWN THE GUI.
all of a sudden I have a preferred networksfile though it doesnt contain teh
password:
------------------------------------------------
./config/iliwi/preferred_networks
------------------------------------------------
cat preferred_networks
00:04:0E:D3:EF:8A "" "" "" ""
------------------------------------------------
iliwi command line is now
------------------------------------------------
** (process:982): CRITICAL **: dbus_g_proxy_new_for_name: assertion
`interface_name != NULL' failed
** (process:982): DEBUG: view_main.vala:140: BT: Entering method:
refresh_list_elements()
** (process:982): DEBUG: view_main.vala:143: BT: cleared wifilist
** (process:982): DEBUG: view_main.vala:156: BT: Visible networks:
** (process:982): DEBUG: view_main.vala:140: BT: Entering method:
refresh_list_elements()
** (process:982): DEBUG: view_main.vala:143: BT: cleared wifilist
** (process:982): DEBUG: view_main.vala:156: BT: Visible networks: WLAN-7BE401
kadersabek WLAN-442090
** (process:982): DEBUG: view_main.vala:161: BT: Entered: foreach
get_visible_networks, need to find place for network: WLAN-7BE401
** (process:982): DEBUG: view_main.vala:166: BT: List is empty, appending
WLAN-7BE401
** (process:982): DEBUG: view_main.vala:161: BT: Entered: foreach
get_visible_networks, need to find place for network: kadersabek
** (process:982): DEBUG: view_main.vala:172: BT: List is not empty, begin
sorting process
** (process:982): DEBUG: view_main.vala:175: BT: Got first item in list
WLAN-7BE401
** (process:982): DEBUG: view_main.vala:183: BT: kadersabek is preferred AND
WLAN-7BE401 is not, doing insert before
** (process:982): DEBUG: view_main.vala:161: BT: Entered: foreach
get_visible_networks, need to find place for network: WLAN-442090
** (process:982): DEBUG: view_main.vala:172: BT: List is not empty, begin
sorting process
** (process:982): DEBUG: view_main.vala:175: BT: Got first item in list
kadersabek
** (process:982): DEBUG: view_main.vala:199: BT: Place not found, doing
item_append
** (process:982): DEBUG: view_main.vala:199: BT: Place not found, doing
item_append
Line 4: Invalid PSK ''.
Line 4: failed to parse psk ''.
Line 5: WPA-PSK accepted for key management, but no PSK configured.
Line 5: failed to parse network block.
Failed to read or parse configuration '/home/root/.config/iliwi
/wpa_supplicant.conf'.
---------------------------
clicking on "kadersabek" network in gui gives me
---------------------------
kadersabek
empty password
password mode hex (was askii before)
preferred yes
hope this all helps to debug
all the best
robin
_______________________________________________
Shr-User mailing list
[email protected]
http://lists.shr-project.org/mailman/listinfo/shr-user
