On Sun, Mar 06, 2011 at 10:16:37PM +0100, panta wrote: > Hello Martin, need a little help (sure I'm not a geek!) > > I downloaded the two files, dfu the first and put the second on my > microsd card.
by put you mean wget/tar/depmod? or you forget 2nd and 3rd step? > > Boot the neo1973 and it arrives till the first settings. > It ask for Language, but i cannot select anything. > I go to ssh into the phone for recalibrate screen, but... it was not > possible. Perhaps I may use another address than 192.168.0.202? It could be missing g_ether module and even worse maybe autoload is missing (if there wasn't kernel-module-g-ether autoloaded module on your rootfs image (using shr-u with this kernel?). Check if you have: SHR root@gjama ~ $ cat /etc/modutils/g_ether g_ether SHR root@gjama ~ $ cat /etc/modprobe.d/g_ether.conf options g_ether dev_addr=00:1F:11:XX:XX:XX host_addr=00:1F:11:YY:YY:YY > > Thank you > > Panta > > [email protected] > > Il 04/03/2011 09:44, Martin Jansa ha scritto: > > On Wed, Mar 02, 2011 at 06:56:36PM +0100, panta wrote: > >> > >>> > >>> Hi, > >>> > >>> great to see gta01 owner willing to test SHR! Hopefully with your help > >>> we'll be able to get SHR to usable state on gta01 again :). > >> > >> Hope this can happen. I think many people own a Neo 1973 and is ready to > >> use if we can give him a working image. > >>> > >>> 1) can you try with "debug" added to kernel cmdline? to see what went > >>> wrong? > >>> > >>> 2) can you try with 2.6.37 from > >>> http://build.shr-project.org/shr-kms/om-gta01/ > >>> also with debug? > >>> > >>> 3) there is new om-for-upstream branch with some fixes for gta01 > >>> http://git.openmoko.org/?p=kernel.git;a=shortlog;h=refs/heads/om-for-upstream > >>> but I didn't build it for SHR yet, if you have time to test it, I'll > >>> prepare image for you. > > > > merged to current master and available here: > > uImage-2.6.37+2.6.38-rc7+gitr1+b65a0e0c84cf489bfa00d6aa6c48abc5a237100f-r0-oe0-om-gta01.bin > > modules-2.6.37+2.6.38-rc7+gitr1+b65a0e0c84cf489bfa00d6aa6c48abc5a237100f-r0-oe0-om-gta01.tgz > > > > http://build.shr-project.org/shr-kms/om-gta01/ > > > > install instructions same as for om-gta02 > > http://build.shr-project.org/shr-kms/ > > > >> I'll try all of this for sure (hope! :) ) Tomorrow. > >> Thank you Martin > >> Ciao > >> > >> Panta > >> > >> [email protected] > > > -- Martin 'JaMa' Jansa jabber: [email protected]
pgpZw8B2RFd3T.pgp
Description: PGP signature
_______________________________________________ Shr-User mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-user
