Hi Frank I am using a number of EPIA ML based systems, running Debian 3.1 (2.4 Kernel), and using ALSA (with PyAlsaAudio 0.2). I am using the standard Shtoom codec (Mulaw as far as I know). I am using OpenSER as a SIP registrar only, but this is running on the same network (as all of the EPIA machines). Would I see any performance improvements by switching to a codec such as Speex? What is the best codec to improve latency on low-powered hardware?
Thanks On Mon, Feb 20, 2006 at 05:09:44PM +0100, Frank Scholz wrote: > Hi Anthony, > > I am currently using the Shtoom and Doug frameworks for an application I > > am developing that is used between a number of fairly slow (Via > > 700Mhz) machines. > which ones? I have an EPIA MS8000, and shtoom is working fine on that. > With a small delay which is due to trip-time phone<->asterisk<->shtoom > in my setup. > I even tried it on slower systems. > I once had a delay of 4 seconds, not with shtoom, but another RTP using > application, but there the reason was a firewall on my system going crazy. > > So the questions are: OS? which codec (I use speex)? direct shtoom<->shtoom > or with asterisk or any other registrar? > > Ciao, > Frank _______________________________________________ Shtoom mailing list [email protected] http://mail.python.org/mailman/listinfo/shtoom
