there is a handy link off the siglinux site to the mail archive.
http://locutus.csres.utexas.edu/siglinux
i'd check your routes and make sure the default route goes through
the eth0 interface. you should probably read the Ethernet-HOWTO
also.
Nathan Sportsman wrote:
> I installed Redhat 6.0 on a machine with a 20 dollar NIC card. It found and
>identified the card as a Digital Tulip on installation. The link light on the nic is
>on at start up and through the boot
> process until it comes to initializing the ethernet iface. I can ping the ip address
>I gave the box, but I can't ping any other computers on my network. Someone mentioned
>to me there was an entire
> thread about these cards a couple of months back. Can someone either point me to the
>SigLinux archive or give an explanation on how to fix it. Nathan
--
tom carlile [EMAIL PROTECTED]
professional systems wrangler
---------------------------------------------------------------------------
Send administrative requests to [EMAIL PROTECTED]
