I am needing some help installing my wireless network card.  I had my wired
NIC working but I realized that the ethernet port in my room ain't hooked up
so I needed to install a wireless card.  I installed a D-Link model DWL-G520
on my system (which is a 802.11g card) and it isn't working.  The attached
file is from my /proc/pci file.  If anyone has any suggestions, please tell
me.

Thanks a lot.

John

P.S.  I looked in my RedHat hardware browser and didn't seem to find any
NIC's that were listed, so I don't know if that means that it's even being
detected properly.  But, in my pci.txt file it seems to have a PCI NIC
installed.
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 3).
      Master Capable.  Latency=32.  
      Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
  Bus  0, device   1, function  0:
    PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 3).
      Master Capable.  Latency=64.  Min Gnt=136.
  Bus  0, device   7, function  0:
    ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 2).
  Bus  0, device   7, function  1:
    IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 1).
      Master Capable.  Latency=32.  
      I/O at 0xf000 [0xf00f].
  Bus  0, device   7, function  2:
    USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1).
      IRQ 10.
      Master Capable.  Latency=32.  
      I/O at 0x6400 [0x641f].
  Bus  0, device   7, function  3:
    Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 2).
      IRQ 9.
  Bus  0, device   9, function  0:
    Ethernet controller: PCI device 168c:0013 (rev 1).
      IRQ 10.
      Master Capable.  Latency=32.  Min Gnt=10.Max Lat=28.
      Non-prefetchable 32 bit memory at 0xea000000 [0xea00ffff].
  Bus  0, device  11, function  0:
    Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 0).
      IRQ 12.
      Master Capable.  Latency=32.  Min Gnt=12.Max Lat=128.
      I/O at 0x6800 [0x683f].
  Bus  1, device   0, function  0:
    VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 1).
      IRQ 11.
      Non-prefetchable 32 bit memory at 0xe4000000 [0xe5ffffff].
      Prefetchable 32 bit memory at 0xe8000000 [0xe9ffffff].
      I/O at 0xe000 [0xe0ff].
_______________________________________________
Siglinux mailing list
[EMAIL PROTECTED]
http://machito.utacm.org/mailman/listinfo/siglinux

Reply via email to