Hello, I have just compiled the latest from github and I have copied
libsigrok/contrib/z60_libsigrok.rules to /etc/udev/rules.d/10-local.rules When I start pulseview it prints the following sr: scpi_usbtmc: Failed to set configuration: LIBUSB_ERROR_BUSY. sr: scpi_usbtmc: Failed to set configuration: LIBUSB_ERROR_BUSY. Once I press Run then it prints sr: hwdriver: Option 'limit_samples' not available for this device. sr: hwdriver: Option 'limit_samples' not available for this device. In dmesg I see the following: [ 842.369308] usb 3-13.3.3: usbfs: interface 0 claimed by usbfs while 'pulseview' sets config #1 [ 842.373128] usb 3-13.3.3: usbfs: interface 0 claimed by usbfs while 'pulseview' sets config #1 and no samples are displayed. Any hint for any configuration I should go check? Thanks, Rodrigo ps: ubuntu 14.04 ------------------------------------------------------------------------------ _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
