Hello
For the record (for people not on IRC channel): *********************************************************************************** Topic sample rate: possibly a group classification is the better choice. Depending on the group, you can then specify a specific value for the properties (as similar hardware) (as already suggested by gsi). If you look at the overview my suggestion would be 3-4 groups, up to 400mhz, up to 100mhz, up to 24mhz. If there is a problem with the detection of the MAx sample rate because of the maximum number of channels, then my suggestion from yesterday MAx sample is already active on all channels (then the group value limits for sample rate are again better to def.) Or the group value limits remain the same, but when determining the sample value, the information of the max. Channel use with! If I now take the information (gsi) together results in: 24Mhz group sample rate 6Mhz; 400MHZ group SR 50Mhz (due to gsi's sigma); 100Mhz ???. (some value 6-50 => 16Mhz because of KingST and WayEng) The fourth group (only one device) I had overlooked to 1Ghz with SR 500Mhz. new Logicanalyzer would have a guideline value for the default Samplerate! ************************************************************************* Jörg ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
