Hi Uwe
It was actually the LibUSB driver. It was installed but had not been file
linked so doing the brew command sorted that problem.
There were a lot of other problems that were preventing the IkaLogic
devices being used and I sent the information to the developers email. I
have managed to get the ScanaLogic-2 working but not the ScanaPlus.
Regards,
Chris
On Wed, 18 Jul 2018 at 15:19, Uwe Hermann <u...@hermann-uwe.de> wrote:
> Hi,
>
> this issue should be fixed now in git, see also
> https://sigrok.org/bugzilla/show_bug.cgi?id=1093
>
> Please feel free to re-open the bug in case you're still getting
> test-case failures.
>
>
> On Tue, Jul 10, 2018 at 12:05:40PM +0100, Chris Mower wrote:
> > I got it running but I noticed that there were far fewer devices in the
> > driver list, in particular the devices that I have namely IkaLogic
> > ScanaLogic and ScanaPlus. Is there something that I need to do to have
> > those available?
>
> Check the ./configure output of libsigrok, it'll tell you which drivers
> are not being built and why. In this case you're probably missing the
> libftdi dependency.
>
>
> Cheers, Uwe.
> --
> http://hermann-uwe.de | http://randomprojects.org | http://sigrok.org
>
--
Kind Regards,
Chris
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
