Hi there,
I've got a little trouble getting PulseView/sigrok to work with my Hameg
HMO2524. When running 'sigrok-cli' to look up device information it states that
'scpi: Timed out waiting for SCPI response'.
I've attached a little log file with debug level set.
Thanks for any help to find out what's wrong,
best regards Marc
--
Entwicklung
Tel.: +49 (0) 36 71 / 5 95 - 1 74
Fax: +49 (0) 36 71 / 5 95 - 1 00 (Sekretariat)
e-mail: marc.lud...@epsa.de<mailto:marc.lud...@epsa.de>
web: www.epsa.de<http://www.epsa.de/>
EPSa Elektronik & Präzisionsbau Saalfeld GmbH
Sitz: Remschützer Straße 1, D-07318 Saalfeld
Amtsgericht Jena, HRB-Nr.: 202312, USt-ID: DE 150 518 462
Geschäftsführer: Dipl.-Ing. MBA Ali Sahin, Dipl.-Wirtsch.-Inf. Rainer Schliwa
$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 05e3:0745 Genesys Logic, Inc. Logilink CR0012
Bus 001 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 007: ID 0403:ed72 Future Technology Devices International, Ltd HAMEG HO720 Serial Port
Bus 001 Device 005: ID 0461:0010 Primax Electronics, Ltd HP PR1101U / Primax PMX-KPR1101U Keyboard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
$ sigrok-cli --version
sigrok-cli 0.7.0
Libraries and features:
- libsigrok 0.5.1/5:0:1 (rt: 0.5.1/5:0:1).
- Libs:
- glib 2.58.1 (rt: 2.58.1/5801:1)
- libzip 1.5.1
- libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1)
- libusb-1.0 1.0.22.11312 API 0x01000106
- libftdi 1.4
- Host: x86_64-pc-linux-gnu, little-endian.
- SCPI backends: TCP, serial, USBTMC.
- libsigrokdecode 0.5.2/6:0:2 (rt: 0.5.2/6:0:2).
- Libs:
- glib 2.58.0 (rt: 2.58.1/5801:1)
- Python 3.7.0 / 0x30700f0 (API 1013, ABI 3)
- Host: x86_64-pc-linux-gnu, little-endian.
$ sigrok-cli --driver hameg-hmo -l 5 --show
sr: [00:00.000001] log: libsigrok loglevel set to 5.
sr: [00:00.000012] backend: libsigrok 0.5.1/5:0:1 (rt: 0.5.1/5:0:1).
sr: [00:00.000039] backend: Libs: glib 2.58.1 (rt: 2.58.1/5801:1), libzip 1.5.1, libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1), libusb-1.0 1.0.22.11312 API 0x01000106, libftdi 1.4.
sr: [00:00.000042] backend: Host: x86_64-pc-linux-gnu, little-endian.
sr: [00:00.000046] backend: SCPI backends: TCP, serial, USBTMC.
sr: [00:00.000049] backend: Firmware search paths:
sr: [00:00.000058] backend: - /home/foobar/.local/share/sigrok-firmware
sr: [00:00.000075] backend: - /usr/share/sigrok-firmware
sr: [00:00.000078] backend: - /home/foobar/.local/share/flatpak/exports/share/sigrok-firmware
sr: [00:00.000082] backend: - /var/lib/flatpak/exports/share/sigrok-firmware
sr: [00:00.000086] backend: - /usr/local/share/sigrok-firmware
sr: [00:00.000088] backend: - /usr/share/sigrok-firmware
sr: [00:00.000113] backend: Sanity-checking all drivers.
sr: [00:00.000131] backend: Sanity-checking all input modules.
sr: [00:00.000135] backend: Sanity-checking all output modules.
sr: [00:00.000140] backend: Sanity-checking all transform modules.
srd: libsigrokdecode loglevel set to 5.
Driver functions:
Oscilloscope
sr: [00:00.001647] hwdriver: sr_config_list(): key 2147418112 (NULL) sdi (nil) cg NULL -> [uint32 20000, 20001]
Scan options:
conn
serialcomm
sr: [00:00.002582] scpi: Opening serial device /dev/ttyUSB1.
sr: [00:00.002589] serial: Opening serial port '/dev/ttyUSB1' (flags 1).
sr: [00:00.003219] serial: Parsing parameters from "115200/8n1/flow=1".
sr: [00:00.003264] serial: Setting serial parameters on port /dev/ttyUSB1.
sr: [00:00.003362] serial: Flushing serial port /dev/ttyUSB1.
sr: [00:00.003374] serial: Wrote 6/6 bytes.
sr: [00:00.003377] scpi_serial: Successfully sent SCPI command: '*IDN?'.
sr: [00:00.018555] serial: Read 44/2048 bytes.
sr: [00:00.018559] scpi_serial: Received terminator
sr: [00:00.018563] scpi: Got response: 'HAMEG,HMO2524,014437113,HW10120001,SW02.505', length 43.
sr: [00:00.018575] serial: Closing serial port /dev/ttyUSB1.
sr: [00:00.018807] hwdriver: Scan found 1 devices (hameg-hmo).
hameg-hmo - HAMEG HMO2524 HW10120001 with 20 channels: CH1 D0 CH2 D1 CH3 D2 CH4 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15
sr: [00:00.018821] device: hameg-hmo: Opening device instance.
sr: [00:00.018838] serial: Opening serial port '/dev/ttyUSB1' (flags 1).
sr: [00:00.019341] serial: Parsing parameters from "115200/8n1/flow=1".
sr: [00:00.019353] serial: Setting serial parameters on port /dev/ttyUSB1.
sr: [00:00.019470] serial: Flushing serial port /dev/ttyUSB1.
sr: [00:00.019474] hameg-hmo: Fetching scope state
sr: [00:00.019481] serial: Wrote 13/13 bytes.
sr: [00:00.019483] scpi_serial: Successfully sent SCPI command: ':CHAN1:STAT?'.
sr: [00:00.034531] serial: Read 3/2048 bytes.
sr: [00:00.034553] scpi_serial: Received terminator
sr: [00:00.034556] scpi: Got response: 'ON', length 2.
sr: [00:00.034583] serial: Wrote 13/13 bytes.
sr: [00:00.034586] scpi_serial: Successfully sent SCPI command: ':CHAN1:SCAL?'.
sr: [00:00.082516] serial: Read 8/2048 bytes.
sr: [00:00.082525] scpi_serial: Received terminator
sr: [00:00.082528] scpi: Got response: '2.0E-01', length 7.
sr: [00:00.082577] serial: Wrote 12/12 bytes.
sr: [00:00.082580] scpi_serial: Successfully sent SCPI command: ':CHAN1:POS?'.
sr: [00:00.114485] serial: Read 14/2048 bytes.
sr: [00:00.114495] scpi_serial: Received terminator
sr: [00:00.114499] scpi: Got response: '-3.005882E+00', length 13.
sr: [00:00.114528] serial: Wrote 13/13 bytes.
sr: [00:00.114546] scpi_serial: Successfully sent SCPI command: ':CHAN1:COUP?'.
sr: [00:00.130511] serial: Read 3/2048 bytes.
sr: [00:00.130532] scpi_serial: Received terminator
sr: [00:00.130535] scpi: Got response: 'DC', length 2.
sr: [00:00.130564] serial: Wrote 21/21 bytes.
sr: [00:00.130580] scpi_serial: Successfully sent SCPI command: ':PROB1:SET:ATT:UNIT?'.
sr: [00:01.130586] scpi: Timed out waiting for SCPI response.
Failed to open device.
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
