The Probe Unit Enquiry command is the one ending with the question mark (?), known in libsigrok as the "GET" command.
However, you are right Stefan, the manual does not explicitly mention the "GET" command, when both the "GET" and "SET" are supported, so there is no documentation error in this case. Unfortunately, there isn't another explanation as to why the device stops responding to such command ! Please see the bug reported by Marc Ludwig and the attached logfile. I have only noticed Marc is using a very ancient firmware version (02), perhaps he should upgrade (i.e. 04 or above) and test again... But the patch is totally harmless, so he could try that too. I have really no other idea on how to help... Regards, Guido On Sat, 03/11/2018 at 20.32 +0100, Stefan Brüns wrote: > On Samstag, 3. November 2018 19:50:40 CET Guido Trentalancia wrote: > > The Probe Unit Enquiry command is not officially documented in the > > SCPI > > Programmers Manual, therefore, although this might just be a > > documentation > > Its documented for the HMO3000 series, HMOcompact (72x, 102x, 152x, > 202x) and > 1002/1202. Which model are you referring to? > > Regards, > > Stefan _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
