That's fine, thanks for pointing that out. I was not sure about this because I could not test it as I have two PODs, but this patch can and should be dropped at this point!
Regards, Guido Il 13 novembre 2018 01:06:37 CET, "Stefan Brüns" <stefan.bru...@rwth-aachen.de> ha scritto: >On Dienstag, 13. November 2018 00:28:26 CET Guido Trentalancia wrote: >> Support the official SCPI command set for single POD devices. >> >> The official SCPI command set does not specify to use a POD >> index for SCPI commands related to the logical POD when only >> one POD is available on the device. >> >> Simply follow the specifications for the hameg-hmo driver. >> >> Signed-off-by: Guido Trentalancia <gu...@trentalancia.com> >> --- > >This is completely unnecessary - both SCPI and the HMO documentation >explicitly state a missing index is interpreted as index 1 - >"POD" === "POD1". > >Regards, > >Stefan9 > >-- >Stefan Brüns / Bergstraße 21 / 52062 Aachen >home: +49 241 53809034 mobile: +49 151 50412019 > >------------------------------------------------------------------------ > > > >------------------------------------------------------------------------ > >_______________________________________________ >sigrok-devel mailing list >sigrok-devel@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/sigrok-devel
_______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
