Hello David, Have you considered running PV from a battery-powered laptop? That way you can also isolate the scope from mains earth.
Regards -Soeren On Mon, 2020-07-06 at 19:30 +0100, David Slipper wrote: > Hi, I have a couple of logic analysers and a Hantek 6022 scope that I use a > lot under Pulseview but I run into problems sometimes with the system under > test interfering with the system running Pulseview. > This seems to be because of a ground loop or other electrical linkage. I have > looks at USB isolators but many of the cheaper ones (often based on the > ADUM3160 chipset) are not capable of the high speed required by my LAs or > Hantek 6022 scope. > Many of the devices capable of handling 480Mb/s are way out of my budget but > I discovered this one at a more reasonable price. > Has anyone any experience of this device with (say) fx2 based devices or the > Hantek 6022 scope ??? > Thanks in advance > Dave > > _______________________________________________ > sigrok-devel mailing list > sigrok-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/sigrok-devel _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
