Yup, there's an FX2 in there, so that'll work just fine. Regards, -Soeren
On Thu, 2020-10-29 at 18:01 +0100, Valerio Messina via sigrok-devel wrote: > OK, thank you > > get this one: > https://www.amazon.it/AZDelivery-Analizzatore-Logico-Logic-Analyzer/dp/B01MUFRHQ2 > > Valerio > > On 10/29/20 5:12 PM, Doug Wegscheid wrote: > > Valerio: a clarification: > > > > the device I sent you a link to works well with sigrok. > > > > I think Soeren is saying that the device you initially referenced does > > NOT work with sigrok. > > > > On Thursday, October 29, 2020, 12:07:52 PM EDT, Soeren Apel > > <soe...@apelpie.net> wrote: > > > > > > Hello Valerio, > > > > This device is unfortunately not supported by sigrok. > > > > From my point of view, a generic $10 FX2-based 8ch/24MHz logic analyzer > > would serve you well. > > > > Regards, > > -Soeren > > > > > > On Thu, 2020-10-29 at 12:05 +0100, Valerio Messina via sigrok-devel wrote: > > > hi, > > > I want to snif an I2C bus where there only a master and a slave. > > > > > > I already have this device: > > > PN:UMFT201XA-01 > > > based on chip: FT201X > > > RS:757-0073 [1] > > > that it is slave only. > > > > > > 1) Can be used as sniffer or I need an I2C master like [2] > > > 2) Is it supported by sigrok? > > > > > > thank you, > > > Valerio > > > > > > > > > [1] > > > > > https://it.rs-online.com/web/p/strumenti-di-sviluppo-comunicazione-e-wireless/7570073 > > > [2] > > > > > https://it.farnell.com/ftdi/umft4222ev-d/scheda-scheda-svil-usb2-0/dp/2860316 > > > > > > > > > > > _______________________________________________ > > sigrok-devel mailing list > > sigrok-devel@lists.sourceforge.net > > <mailto:sigrok-devel@lists.sourceforge.net> > > https://lists.sourceforge.net/lists/listinfo/sigrok-devel > > _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
