Hi, found the problem: our pi used a old “stretch” Raspbian, there is 0.1.3-1 as sigrok-firmware-fx2lafw, and this version is to old ☹
Best regards, Hermann From: Hermann Schmidt via sigrok-devel <sigrok-devel@lists.sourceforge.net> Sent: Montag, 14. Dezember 2020 16:41 To: sigrok-devel@lists.sourceforge.net Subject: [sigrok-devel] Problem with sigrok-cli and Noname_LHT00SU1 SIGROK-DEVEL@LISTS.SOURCEFORGE.NET<mailto:SIGROK-DEVEL@LISTS.SOURCEFORGE.NET> appears similar to someone who previously sent you email, but may not be that person. Learn why this could be a risk<http://aka.ms/LearnAboutSenderIdentification> Feedback<http://aka.ms/SafetyTipsFeedback> Hi, for a test system we want to use sigrok-cli on a Raspberry Pi with a LHT00SU1. With the digital inputs, there is no problem, system is functional. But now, we want to use one of the analog inputs of the device. According https://sigrok.org/wiki/Noname_LHT00SU1<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsigrok.org%2Fwiki%2FNoname_LHT00SU1&data=04%7C01%7CHermann.Schmidt%40husqvarnagroup.com%7Ce686b58c393f422a9e1008d8a04bc0da%7C2a1c169e715a412bb52605da3f8412fa%7C0%7C0%7C637435594504473159%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Wy5l3vQBWd8OGGdIknIzcbM5eeCdrJESDsM1oH9eQNk%3D&reserved=0>, this should be possible. But sigrok-cli know nothing about analog inputs: pi@knecht:~ $ sigrok-cli -d fx2lafw --scan The following devices were found: fx2lafw:conn=1.8 - CWAV USBee AX with 8 channels: 0 1 2 3 4 5 6 7 Linux version: pi@knecht:~ $ uname -a Linux knecht 4.19.66-v7+ #1253 SMP Thu Aug 15 11:49:46 BST 2019 armv7l GNU/Linux sigrok-cli version: pi@knecht:~ $ sigrok-cli -V sigrok-cli 0.5.0 Using libsigrok 0.3.0 (lib version 2:0:0). Using libsigrokdecode 0.3.0 (lib version 2:0:0). Has someone a hint what I’m doing wrong? Best regards, Hermann The information in this email may be confidential and/or legally privileged. It has been sent for the sole use of the intended recipient(s). If you are not an intended recipient, you are strictly prohibited from reading, disclosing, distributing, copying or using this email or any of its contents, in any way whatsoever. If you have received this email in error, please contact the sender by reply email and destroy all copies of the original message. Please also be advised that emails are not a secure form for communication, and may contain errors.
_______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
