>From https://sigrok.org/wiki/Protocol_decoder_HOWTO, the instructions are >clear:
"On Windows systems additional decoders are read from %ProgramData%\libsigrokdecode\decoders." ...and yet, I've created a protocol decoder based on an existing one and when I create this path and copy my protocol decoder there (in its own sub-folder) it isn't listed along with the others in PulseView. I've spent a lot of time trying variations of folder names, searching online, program and computer restarts. I'm at a loss and would appreciate some troubleshooting steps and guidance. I'm probably missing something very basic, but what? Is there a way to tell if the decoder isn't being loaded due to an error I've made? I've checked the log (Settings --> logging) and it doesn't look like anything related to PD loading is output there. ===== Potentially useful info... I'll happily supply more if requested. Windows 10 Home, x64 Installed from pulseview-0.4.2-64bit-static-release-installer.exe >From PulseView Settings --> About (truncated): Versions, libraries and features: PulseView 0.4.2 libsigrok 0.5.2/5:1:1 (rt: 0.5.2/5:1:1) libsigrokdecode 0.5.3/6:1:2 (rt: 0.5.3/6:1:2) Protocol decoder search paths: C:\ProgramData\libsigrokdecode\decoders C:\Program Files (x86)\sigrok\PulseView\share\libsigrokdecode\decoders C:\Program Files (x86)\sigrok\PulseView\share\libsigrokdecode\decoders ===== Thank you -- Sent from my writing desk via carrier pigeon _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
