On Mon, 2022-02-28 at 17:15 +0000, Kevin Grant wrote: > > Hi Gerhard, > > You have been busy making some good improvements to the kingst > driver. Nice to see the LA5016 supported - I guess you must have > kingst hardware now? LA2016 and LA5016?
See the recently rearranged wiki pages https://sigrok.org/wiki/Kingst_LA_Series Have added one "series" page with common information, so that the individual devices' pages can be made less redundant. I could check LA2016 and LA5016 here, they work as expected. With capture to the device's RAM as well as streaming. Would be good if somebody with LA1016 could re-check, it was supported before and should have remained operational. LA1010 was added but is completely untested due to lack of access to the hardware (streams only because it lacks any RAM in the device). The LA5032 is a special case with its 32 channels, which I did reasoned guesses about but these are yet to get verified. Takes somebody with access to the hardware to see if it works or if more tweaking is required. The Linux versions should work (tested here). Windows is untested (libusb use is currently work in progress, may or may not have hiccups, these would be indenpendent from Kingst LA support). When in doubt then run Linux for comparison or build Windows binaries from sources. Use any libusb version that's desired. virtually yours Gerhard Sittig -- If you don't understand or are scared by any of the above ask your parents or an adult to help you. _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
