Hi, I am new to this tool, so forgive me if this is a trivial question.
I want to realtime sniffing Ieee488 bus with sigrok-cli & fx2lafw. I can already sniffing Ieee488 bus with pulseview & Cypress FX2. And,I can read pulseview results to use sigrok-cli like follows. >C:\Program Files\sigrok\sigrok-cli>set PD_PINS=dio1=DIO1:dio2=DIO2:dio3=DIO3:dio4=DIO4:dio5=DIO5:dio6=DIO6:dio7=DIO7:dio8=DIO8:eoi=EOI:dav=DAV:nrfd=NRFD:ndac=NDAC:ifc=IFC:srq=SRQ:atn=ATN:ren=REN >C:\Program Files\sigrok\sigrok-cli>sigrok-cli -i test1.sr -P ieee488:%PD_PINS% -A ieee488=texts ieee488-1: *IDN? ieee488-1: TEKTRONIX,TDS 3024B,0,CF:91.1CT FV:v3.4 TDS3GV:v1.00 TDS3FFT:v1.00 TDS3TRG:v1.00[LF] I can not understand setup details. Pls teach me. I'd like to know how to define as follows, [1],[2],[3] [1] Pin assign >C:\Program Files\sigrok\sigrok-cli>set PD_PINS=D0=DIO1:D1=DIO2:D2=DIO3:D3=DIO4:D4=DIO5:D5=DIO6:D6=DIO7:D7=DIO8:D8=EOI:D9=DAV:D10=NRFD:D11=NDAC:D12=IFC:D13=SRQ:D14=ATN:D15=REN >C:\Program Files\sigrok\sigrok-cli>sigrok-cli --config samplerate=1M --driver=fx2lafw --continuous -P ieee488:%PD_PINS% -A ieee488=texts >Unknown option or channel 'D15' [2] tigger >C:\Program Files\sigrok\sigrok-cli>sigrok-cli --config samplerate=1M --driver=fx2lafw --continuous -P ieee488 -A ieee488=texts -t atn=r >Invalid channel 'atn'. [3] iec_periph >C:\Program Files\sigrok\sigrok-cli>sigrok-cli --config samplerate=3M --driver=fx2lafw --continuous -P ieee488:%PD_PINS% -A ieee488=texts:iec_periph=1 >Unknown option or channel 'ATN'
_______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
