Hi all,

I'm facing several problems when trying to use my DreamSourceLab DSLogic basic 
with
PulseView, i.e.:

- sometimes it does not trigger on the signal
- sometimes it triggers and captures the buffer, but the buffer is all '1'
- only some combinations of sample rate and buffer size seem to work, e.g.
  20MHz and 10Msps seems to work and giving a correct capture, other settings
  do not trigger and/or gives back an all '1' buffer
- sometimes it goes nuts and the capture does not stop and the buffer starts
  to fill with the same repeated data infinitely and I need to unlplug and
  replug to have ti working again. (I remember reading of a problem like that
  on the list but I can't find it now)

I'm using latest PulseView appimage (0.5.0-git-9b8b734, libsigrok 
0.6.0-git/4:0:0 (rt: 0.6.0-git-b503d24/4:0:0))

I've downloaded and installed the vendor suggested firmware following this 
script:
http://sigrok.org/gitweb/?p=sigrok-util.git;a=blob;f=firmware/dreamsourcelab-dslogic/sigrok-fwextract-dreamsourcelab-dslogic

Has anyone encountered similar problems ? Can anyone suggest some solution ?
Thanks in advance for any help :-)


This is the information output using sigrok appimage:

./sigrok-cli-NIGHTLY-x86_64-debug.appimage --driver=dreamsourcelab-dslogic 
--show
Driver functions:
    Logic analyzer
Scan options:
    conn
dreamsourcelab-dslogic:conn=1.12 - DreamSourceLab DSLogic Basic with 16 
channels: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Channel groups:
    Logic: channels 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Supported configuration options across all channel groups:
    continuous: on, off (current)
    limit_samples: 0 (current)
voltage_threshold: 0.0-0.0, 0.1-0.1, 0.2-0.2, 0.3-0.3, 0.4-0.4, 0.5-0.5, 0.6-0.6, 0.7-0.7, 0.8-0.8, 0.9-0.9, 1.0-1.0, 1.1-1.1, 1.2-1.2, 1.3-1.3, 1.4-1.4, 1.5-1.5, 1.6-1.6, 1.7-1.7, 1.8-1.8, 1.9-1.9, 2.0-2.0, 2.1-2.1, 2.2-2.2, 2.3-2.3, 2.4-2.4, 2.5-2.5, 2.6-2.6, 2.7-2.7, 2.8-2.8, 2.9-2.9, 3.0-3.0, 3.1-3.1, 3.2-3.2, 3.3-3.3, 3.4-3.4, 3.5-3.5, 3.6-3.6, 3.7-3.7, 3.8-3.8, 3.9-3.9, 4.0-4.0, 4.1-4.1, 4.2-4.2, 4.3-4.3, 4.4-4.4, 4.5-4.5, 4.6-4.6, 4.7-4.7, 4.8-4.8, 4.9-4.9, 5.0-5.0
    conn: 1.12 (current)
    samplerate - supported samplerates:
      10 kHz (current)
      20 kHz
      50 kHz
      100 kHz
      200 kHz
      500 kHz
      1 MHz
      2 MHz
      5 MHz
      10 MHz
      20 MHz
      25 MHz
      50 MHz
      100 MHz
      200 MHz
      400 MHz
    Supported triggers: 0 1 r f e
    captureratio: 0 (current)
    external_clock: on, off (current)
    clock_edge: rising (current), falling


_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel

Reply via email to