Not sure but you may need to look at "zadig" to install the winusb driver. On 04/08/2025 20:50, John via sigrok-devel wrote:
I am trying to get a QuantAsylum AQ100 device to work with Sigrok. Its a mixed signal device with a 2-channel oscilloscope and 12-channel Logic Analyser. It is admittedly an older device, but is listed under the 'work in progress' section, so I am not sure how far that work progressed and whether it was actually completed? Given that its an FX2LP device, I expected that the LA part at least would work, but the device is not getting recognized at all. I have separately a Cypress CY7C68013A breakout board which work just fine, so I do know that the FX2LP driver is actually working at least. Has anyone got this to work with Sigrok at all? _______________________________________________ sigrok-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sigrok-devel
_______________________________________________ sigrok-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sigrok-devel
