I don't believe adding honey in silver production does result in
smaller particle size or increased yield.
See my message dated Saturday 6th June attached, which seems to have
slipped by you all.
Ivan
----- Original Message -----
From: James Osbourne, Holmes <[email protected]>
To: <[email protected]>
Sent: Tuesday, 8 June 1999 05:11
Subject: RE: CS>Honey
> Re: small particle size from honey addition in silver production.
What is
> the reference documenting smaller particle size? Same for increased
yield.
> James Osbourne, Holmes
>
> [email protected]
>
> -----Original Message-----
> From: Marshall Dudley [SMTP:[email protected]]
> Sent: Monday, June 07, 1999 11:02 AM
> To: [email protected]
> Subject: Re: CS>Honey
>
> http://www.zetatalk.com/health/theal20g.htm
>
> This is truly interesting. I have been monitoring the colloidal
silver
> mailing list, and it seems that adding a drop of honey to the water
before
> making the colloid results in not only higher ppm, but smaller
particle
> size.
> If we have to add a sugar to the disinfectant to crack the spores,
maybe we
> can add it before the process, and thereby go higher than the 10 ppm
we had
> previously thought was the limit.
>
> I will do some testing with honey and corn syrup to see. I wonder
if
> sourwood
> would be best. :>
>
> Marshall
>
> Tom Trauberman wrote:
>
> > The attached page says the following <<< Merlin Wolf gave me a
great
> > tip for making superlative colloidal silver, with less concern for
oxide
> > buildup and runaway current flow. He suggested placing one tiny
drop of
> > honey into the solution at the beginning of the process. Honey is
a
> > saccharide (sugar) which structures the electrical and magnetic
> > properties of water in a very unique way. This structuring allows
the
> > silver colloid to form at a faster rate, while at the same time
reducing
> > the buildup of silver oxide that would normally occur without the
> > addition of the honey. Why this happens, I am not sure-but it
works! You
> > wind up with a higher density silver concentration (measured in
parts
> > per million {ppm}), made in a shorter period of time, with less
buildup
> > of silver oxide on the positive electrode! What a guy! >>> I'm
confused,
> > this copy says " faster rate" "higher density"
> >
> > Tom
> >
> >
> ------------------------------------------------------------------
------
> > http://www.zetatalk.com/health/theal20g.htm
>
>
>
>
> --
> The silver-list is a moderated forum for discussion of colloidal
silver.
>
> To join or quit silver-list or silver-digest send an e-mail message
to:
> [email protected] -or-
[email protected]
> with the word subscribe or unsubscribe in the SUBJECT line.
>
> To post, address your message to: [email protected]
>
> List maintainer: Mike Devour <[email protected]>
>
>
> --
> The silver-list is a moderated forum for discussion of colloidal
silver.
>
> To join or quit silver-list or silver-digest send an e-mail message
to:
> [email protected] -or-
[email protected]
> with the word subscribe or unsubscribe in the SUBJECT line.
>
> To post, address your message to: [email protected]
>
> List maintainer: Mike Devour <[email protected]>
>
--- Begin Message ---
----- Original Message -----
From: Tom Trauberman <[email protected]>
> On April 6, 1999 Ivan wrote; <<< Adding a drop of honey does not
speed
> the reaction or lower the resistance of d. water. It does however,
make
> the colour of the CS much darker than it would otherwise have been
> (deeper yellow etc.) and so the solution LOOKS more concentrated
than it
> actually is. It may stabilise the solution though. More on this in a
> later post.>>>
> Has anyone done a ppm test on honey produced CS to see if indeed it
is
> less concentrated? Why does CS produced this way have a deeper color
> than otherwise?
>
> Tom
Tom,
I made 2 batches at the time of the above post, one in cold water one
in hot. I had intended to post a complete report after I had observed
the stability of the solutions, but never did :-(
However I have opened the journal, and will do so now.
I used one of my small generators, 15 Volts in 200 mls of d. water
(7.25oz).
1. Hot water - 1.5 hrs - 12 ppm
Colour - rich gold with iridescent orange, rose and violet hues. Quite
beautiful. Some turbidity (cloudiness).
Filtered - 5.5 ppm.
After 2 weeks - 1.25 ppm - turning dark - fallout.
2. Cold water - 2.75 hrs - 9.5 ppm
Colour - yellow with iridescent green hue.
Some turbidity.
Did not filter a sample.
After 2 weeks - 10 ppm - no change.
After 2 months (today) - 9.5 ppm - no change
Conclusions:
1.Honey molecules do not dissolve into component ions and lower the
resistivity of d. water.
2.The cs generation process takes the same time (within normal
variation) as pure d. water.
3.The resultant solution is much darker than the same solution made
with pure d. water(hot water - clear to very pale yellow, cold water -
clear). Much larger particles are present, as is evidenced by the
colour and the turbidity, and the fact that filtering lowers the
concentration.
4.The solution looks stronger than it is, using my normal generating
characteristics.
5.Stability of the solution is probably similar to pure cs of the same
particle sizes.
After these tests I decided there was no reason to add honey to the d.
water and promptly forgot all about it, but I still have half a bottle
of the cold water solution and will continue to test it periodically.
It may be that adding honey may bind with particles in a colloidal
sense and prevent them from migrating to the cathode under high
current conditions. I have not tested for this.
Regards - Ivan
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
[email protected] -or- [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.
To post, address your message to: [email protected]
List maintainer: Mike Devour <[email protected]>
--- End Message ---