Hi George, Have a look at : http://www.atlasnova.com/CSMakingInfo.htm
The last few pics show what happens when I used H2O2 to clean up. Best Regards, Arnold Beland www.atlasnova.com ----- Original Message ----- From: George Knoll To: [email protected] Sent: Friday, January 25, 2008 10:37 AM Subject: CS>Questions about CS mA and use of H2O2 Hi everybody, and newbe.s..lukers..ect I really appreciate the silver-list and the CS info that I have gotten from the fellows like Ode and Bruce. The ref that one gave me is one of the best sites I have seen: http://www.fugitt.com/cs_notes/ I have a variable voltage power supply , a walmart air pump and a hot plate set to 165 degrees. I also use a timer so I can shut the process off in case I can't get to it in time, like at night time or away at work. This is the only site that I have found that uses H2O2 and the info is in the http://www.fugitt.com/cs_notes/ ..sifte. I think is very relevant to a product effectiveness and quality. One other site, www.utopiasilver.com sells a CS product . Thay clamed they make a 80-20 product part ionic and part non ionic with trace minerals. There are many many testimonies on this site at to healing from there CS Utopia sells a battery generator with silver wires for under $40.00 U.S.. I purchased one and it works well on 3 - 9 volt batteries.. I have moved up to a D.C Power supply That I had . I have some questions.. as I want the most effective CS I can make and the best quality.. No. 1.. When one adds H2O2 how much per quart... then I assume you would multiply the by 4 for a gal. No.2 I have 4 sq in of Silver bar in a qt jar and start my current at 4 mA on my power supply.. As the process continues over time the density of silver builds up in the water and the mA will increase to over 15 mA. My question is would it not be better to lower the mA back to 8 or less to have a better product? Lowering the mA wil prolong the process. taking longer but my goal is quality. Does it make a difference My voltage starting out is 30 volts. On my present setup to bring the mA down requires less volts. I have order a 40 mA dc light bulb and that will help Let me know your thoughts.l I hope this also helps some new be CS makers George Knoll [email protected] EarthLink Revolves Around You.
