It does seem that not very much is offered for sixty dollars. I can't
really see a current imiting device in the illustration. The electrodes our
only 4 inches in length and they do not mention and what gauge silver wire
they are using. If a person is willing to spend a mental effort rather than
simply forking over money they might have a look at the following effort on
my own part:
http://www.atlasnova.com/CSMakingInfo.htm
I have tried to provide the guidance which I believe to be necessary for
people to follow in order to make the best colloidal silver possible on
their own. If you are not overwhelmed by the complexity, which could well
be because of my inability to simplify the process sufficiently, then you
should probably go for a fully automatic unit. I would say that the silver
puppy represents the best value for such a device. Ken is an honest person
and has been a invaluable contributor to the CS list for many years. If you
decide to order the kit from Atlasnova and spend sometime experimenting with
the process, you will become competent to expand the production of colloidal
silver to as many gallons as you wish. This would then entail the purchase
of a proper Power Supply, choosing a different value current limiting
resistor and a greater amount of 9999 silver wire. Have a look and decide
for yourself.
----- Original Message -----
From: "Dan Nave" <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Friday, October 03, 2008 7:53 AM
Subject: RE: CS>Colloidal silver generator ?
Did anyone respond to this post?
I wouldn't pay $60 for that "generator." Ya, it will work, but it is
absolutely basic and you will have to babysit constantly, and not get
the best product that we know how to make.
For almost (just) twice as much you can buy the full featured
SilverPuppy with all the bells and whistles!
Look into that, it is worth the investment.
Dan
-----Original Message-----
From: Jeffery Burke [mailto:[email protected]]
Sent: Monday, September 22, 2008 10:37 AM
To: [email protected]
Subject: CS>Colloidal silver generator ?
> I was thinking of buying a colloidal silver generator online, and
> trying to make my own product for myself.Since it is so
expensive!!!
> My question is can I make it safe at home with a
inexpensive set-up of
> 2 leads with a 9 volt battery and 2 rods in distilled water??? Will
> the quality and particle size be just as good as store bought
> preparations.Or will I need buy a real expensive machine to
make the
> quality I'm looking for?That costs hundreds of $$$. I read that the
> particle size has to be real small and the dilution has to
be around
> 10 ppm to be safe and effective to take? I will post the
link to the
> one I would like to buy. thx's
http://www.elixa.com/silver/MiniCS.htm
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: [email protected]
Address Off-Topic messages to: [email protected]
The Silver List and Off Topic List archives are currently down...
List maintainer: Mike Devour <[email protected]>
