Renee,

I have a Kangen water filtration system.  To make the low pH water (2.5) and
the high alkaline water (11.5) simultaneously (each one coming out of their
own hose), we add a salt water solution to the machine.  The salt may be
used to increase the electrolysis or the current.  Sorry, I'm not a techie.
To make the inbetween ranges of water on the pH scale we don't use the salt
solution.

I think it has platinum coated titanium plates if that makes any
difference.

Sharlene

On Sat, Apr 4, 2009 at 8:59 AM, Gaiacita <[email protected]> wrote:

>    Except for the titanium plates, you mean Chuck. :-)  I actually have a
> couple wall warts here, but no titanium.  Nor stainless steel plates--though
> that site says stainless is not recommended.  Jason Eaton said that car
> chamois is probably what is used as the membrane between the water
> containers.  We spoke of this before, on his list, and he felt a drawback
> would be the plastic containers this guy uses.  I suggested glass
> containers.  Easily drilled if careful, and a pvc pipe between them, chamois
> between and titanium plates.
>
> But this would just give acid and alkaline water.  That's why I don't see
> the difference between this and the miracle water, except perhaps that it is
> made with salt water?  And in both sides or just one side?
>
> And what is it about salt that would make this water so much better than
> "plain" acid/alkaline water?
>
> Samala,
> Renee
>
> *-------Original Message-------*
>
> Kinda like what we've been describing, only with wicks between the
> containers.
> $150 for pretty much what you can find around the house, except for
> the wall wart suppy, maybe.
>
>
>