Look at: http://www.fugitt.com/cs_notes/
Look under "Technical" and then "CS Calculations" or "Faraday Calculator." With this, you can calculate the maximum concentration of CS that you could have made. You will probably have some losses so your ppm concentration will be somewhat less. If you used polarity switching of the electrodes, I would expect the ppm calculation to be quite accurate. Dan On Wed, Apr 15, 2009 at 1:45 AM, Wayne Fugitt <[email protected]> wrote: > At 11:04 PM 4/14/2009, you wrote: >> >> How does one test for CS ppm? I know my voltage, my amperage, the >> quantity of distilled water & the running time. Is there an simple & >> cheap way to figure ppm? > > Some things, yes, > Some things, no. > > The simple ones are only 10th grade math. > > I got so tired of doing it, I wrote a program to do my calculations, > even one I called, "Backwards ppm Calculations". > > The complex one could be put into an Excel Spreadsheet > template, no doubt. > > It should be contained on the simple Silver list Archive. > If not, we could add it, with instructions. > > Dan Nave will provide it, ...... and the instructions. > Others can do it also. > > Most have likely forgotten or lost the link. > > http://www.fugitt.com/cs_notes/ > > It is still there, as it has been for some time. > > No cost, no guarantee, ......... but take a look > to see what you find. > > Wayne > > ================================ > > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > > Instructions for unsubscribing are posted at: http://silverlist.org > > To post, address your message to: [email protected] > > Address Off-Topic messages to: [email protected] > > The Silver List and Off Topic List archives are currently down... > > List maintainer: Mike Devour <[email protected]> > >
