Sorry for being dense, but what is GSH please? dee
On 21 Aug 2009, at 19:15, Brooks Bradley wrote:
While our GSH encapsulation/evaluation experiments were conducted,
essentially, during the same time-frame as those involving vitamin
C....I have, as yet, made no comment to this list as to our specific
procedures/results involving GSH. However, GSH does demonstrate to
be of primary importance concerning the issue of basic human health.
I will strive, in the near future, to make some judicious comments
on our progress regarding GSH encapsulation using our basic,
ultrasonic methodology. In the meantime, common sense should serve
as your guide in conducting your OWN experiments. There is small
chance you can (using basic ultrasonic energy drivers)that you can
evoke any compromising circumstances or chemical modifications that
would produce negative substances for human health. At least, that
has been our experience.
We HAVE NOT attempted to encapsulate GSH and Vitamin C as a
comsposite mixture.
Red does demonstrate to be the most useful portion of the
spectrum....for the type of high-energy light applications to which
I have referred to in my recent posts. Our best results have been
achieved in the 660nm to 680nm range, but frequencies both above and
slightly below should effect useful....even if somewhat reduced
results. Note: The color of the unexcited BULB does not have to be
RED, but the COLOR it emits when under power.... does.
Sincerely, Brooks Bradley.
p.s. I do feel constrained to inform list members of a Caution
relating to temperatures of the liquid environment during excitation
of "most" of the Ultrasonic type cleaners presently in
use....excepting research applications.
To wit: As most of the Ultrasonic energy generators (constructed
with ceramic-based transducers), use materials composed, primarily
of barium titanate......understand they are quite vulnerable to high
temperatures [any thing over about 180 degrees F is a threat to
destroy their piezoelectric ability). Alternately, generators
employing Lead Zirconate
Titanate have a much greater resistance to more elevated
temperatures, 212 F and higher. Few piezoelectric devices available
in the commercial market directed toward the "lay-person"
public....are constructed of Lead Zirconate materials.
Some of the ultrasonic generators (the cheapest ones) utilize
"magneto-strictive" transductors. That is, they are, essentially,
solenoid-type devices which respond to the rapidly changing current
flows furnished by their power-system drivers. Almost all, of either
type system, employ frequencies around 38 kilohertz or slightly
higher. It is of some concern that the experimenter keep ALL
electronic devices sensitive to high frequencies.....at least FOUR
feet away for an operating US generation system. This includes
ELECTRONIC WATCHES.
---------[ Received Mail Content ]----------
Subject : CS>Brooks: About GSH need.
Date : Thu, 20 Aug 2009 20:10:49 -0700
From : Peter R <[email protected]>
To : [email protected]
Dear Brooks
The latest Livon booklet states that for full effect the addition of
"Lipo-Spheric GSH" is required. (GSH = Glutathione Sulfhydryl)
Do You know if the GSH can be added to Vitamin C-lecithin mixture and
mix then at the same time?
Or can they be produced by the same procedure?
When You refer To LED light in previous postings, is the color red?
Does any particular frequency is better?
Thank your many contribution.
Regards
Peter R
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: [email protected]
Address Off-Topic messages to: [email protected]
The Silver List and Off Topic List archives are currently down...
List maintainer: Mike Devour
