Interesting -- I have had little success using 3%, since it almost always turns misty. I wonder what exactly the other 97% consists of...
Dick ----- Original Message ---- From: Dorothy Fitzpatrick <[email protected]> To: [email protected] Sent: Sun, April 11, 2010 11:34:22 AM Subject: CS>CS and hydrogen peroxide - success! for some reason I have had two batches of CS go yellow on me. Both batches have had to brew for some six hours for half a litre and then still been only about 12ppm (which drops to 8) so I had to run them on for another hour or so. Both have gone slightly yellow so I added two drops of H202 - 35%. Well, it has gone clear after a few minutes and reads at 10ppm which is what I want. This is the first success I have had doing this but I have to say that this time I did use the 35% whereas the other times I had used store bought 3%. dee -- The Silver List is a moderated forum for discussing Colloidal Silver. Rules and Instructions: http://www.silverlist.org Unsubscribe: <mailto:[email protected]?subject=unsubscribe> Archives: http://www.mail-archive.com/[email protected]/maillist.html Off-Topic discussions: <mailto:[email protected]> List Owner: Mike Devour <mailto:[email protected]>
