David wrote: > Some people say to make your own CS and *use* salt > in the water (to speed up the electrolysis). > > Others say to *never* use salt--it makes big particles, > makes a chloride, etc. . > > Do you know of anyone who has **"proved"** which way is > correct?
Peter Lindemann's article, at: http://www.elixa.com/silver/lindmn.htm ...is one of the main sources of the "don't use salt" school of thought. He has had "salt enhanced" CS looked at under the electron microscope and verified that it has bigger particles than that made without salt. The only catch is that he has not chosen to publish any data, as far as I know, so we have to take his word for this, or spend hundreds of dollars on testing ourselves. I know of nobody who has repeated his work *and* published the micrographs. (If anybody *has*, please let me know!! Thanks.) As Chuck says, it's easy enough not to use salt, and we've reached a fairly settled consensus not to. But folks have and are using salt and not dropping dead or turning grey from it as far as we've been able to learn, so there may be no definitive answer. You're asking the right kind of questions, David. Just be patient with the confliction opinions you'll run across. You'll soon figure out that just about any method *can* be made to work, and that most improvements on the basics are no more than enhancements of something that already is adequate. Be well, Mike D. silver-list owner Disclaimer: I, MICHAEL DEVOUR, DISCLAIM ANY RESPONSIBILITY FOR THE USE OR MISUSE OF THE INFORMATION, INCLUDING LINKS, PROVIDED ON THIS LIST. EVERY INDIVIDUAL SHOULD OBTAIN COMPETENT MEDICAL ADVICE BEFORE USING THIS INFORMATION. THIS FREE INFORMATION HAS NOT BEEN VERIFIED BY ME AND IS PROVIDED SOLELY FOR INFORMATIONAL PURPOSES TO INDIVIDUALS INTERESTED IN THESE TOPICS. [Mike Devour, Citizen, Patriot, Libertarian] [[email protected] ] [Speaking only for myself... ] -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] List maintainer: Mike Devour <[email protected]>
