hello friends and new to the silver list group and would like to share my
findings on ionic silver.
i been using it for almost a month and have had great results in flu, cold,
respiratory infection, febers, dandruff,pimple remover, new castle, and bird
infections, chronic fatige, water desinfectant, artitris, and will begin using
it on a friend that has hiv positive and another relative with cancer, will
share our results ass soon as there are improvements.
well i started as with many of us. simple generator bought on mercado libre
mexico, just like ebay in usa.
it came with a tds reader, silver wire, aligator clip and a small handbook and
helpfull literature to get started. my firt batch came at 19ppm very clear,
little sediments, took over 3 days at 7vdc and current unlimited max at 250mA,
on the cathode and anode could see a the anode darkening and the cathode cover
with silver particles but did not stirr the solution..
i begun to read more and more and decided i need a way to stirr the solution
and to have a more cuality grade instruments to better the final solution .
so i bought the following.
1lt kimble flask with rubber stopper.
took apart an old pc power source and took out to small colling fan and took
apart and old HDD and took out the magnets inside of it and glue it to the
fans, took a while to center the magnets .
bought a variable power source with regulated V and AMp both with limiting
options and fin and coarce option, no pulse frecuency, not yet any how.
also a boght a zapper with varaible frequency range 1hz to 200,000hz that can
give out both rife and hula clarck espesific frequencias, still waiting for
this zapper but ill used it to treat whatever comes to mind that be apply to it
but also to infuse my finish ionic silver with the love frequency and other
healing frequency, very interestd in the results of using this type of
sulution.. ill happyly share it all on this group.
i also experimented with multiple voltage from 4 to 42vdc and found that at
higher voltage intially take much lees time to get the conductivity going in
the distille water but once a conductivy is reach it begins to make a lot a
lot more silver mud and silver particles accumulated on the cathode . i have
to state that no stirring was used in 42vdc, might have help out lowering
aglomeration but did not further experimented with constant high voltage.
will give a try again and ill sahre my findings.
also in all my testing with different voltage a mA i have had solution very
clear to clear to slight cloudy or turbit and small amounts of particles
sediments. i always filter my finish solution with coffe grade filters usually
8to 10 filters put together but ill invest in some microfilters or membrane
filters to see if any improvements is presents in using different grade
filters.
hope this is usefull to some. as i found much usefull info on this list.
namaste.
