Hi Folks! Just a quickie.
You only need one bottle and its cap with a hole in it for the "vortex" part. Instead of a matching bottle for "storage", find a bottle that has an opening just a bit bigger than the neck and cap of the vortex bottle. The vortex bottle neck will just fit inside the storage bottle neck and all will work just as well. If you don't have the tools to make a hole (3/8" or so), you can take the cap from a spring water "sports bottle". It already has a hole (~ 1/2") in it , so if you pull the "knob" up to "drinking" position and saw across just below the knob, you are almost there. There will still be some of the "tube" left, but now you can see how much more you have to saw/file/chew off to get to where it is almost flat. These caps seem to vary in style and shapes, so that is why I am not being very specific. The main thing is to saw or file it to the point where going any farther will start to open the hole wider. So, that's it. A bottle and cap w/hole, a bottle into which the other bottle neck will fit, and some magnets. Can it get any simpler?? Time to cut ZZZZZZZZZZZZZ. Good luck, David -- E-mail to: [email protected] (no attachments) Otherwise: [email protected] Fax to: 1-253-681-1133 __________________________________________ NetZero - Defenders of the Free World Get your FREE Internet Access and Email at http://www.netzero.net/download/index.html -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] List maintainer: Mike Devour <[email protected]>
