I use the NaCL as it is the closest to what the reading would be. Some say the read X 2 or 2.5 to be in "the ballpark" a tds meter does not measure silver it measures conductivity.
________________________________ From: Dave Neuman <[email protected]> To: "[email protected]" <[email protected]> Sent: Thursday, June 13, 2013 9:24 AM Subject: CS>New member with question about HM COM-100 meter Hi - New member Dave N (hello out there). Just recently began brewing my own CS with a Silver Puppy generator. Started using bottled CS (Food for Health International's Activz Silver) after researching and pondering for about 2 years. I have ordered and will be using a nebulizer to control my slight asthma condition. Seeing that there are so many uses for CS for the home and personal sanitary purposes, I decided to start making my own. I have a question about which setting to set the COM-100 meter at. The directions state either the 442 or the NaCL setting. Since there is no salt either in the distilled water or the CS that I am brewing (from my best guesses), I am using the "442" setting but I just want to get more info from seasoned users. Thanks for any advice you can send my way. Regards, Dave N. -- The Silver List is a moderated forum for discussing Colloidal Silver. Rules and Instructions: http://www.silverlist.org Unsubscribe: <mailto:[email protected]?subject=unsubscribe> Archives: http://www.mail-archive.com/[email protected]/maillist.html Off-Topic discussions: <mailto:[email protected]> List Owner: Mike Devour <mailto:[email protected]>
