One other exception; I didn't use any starter CS. Started with 8oz of distilled water.
-----Original Message----- From: Hutt William J (Bill) DLPC [mailto:[email protected]] Sent: Friday, October 22, 1999 8:19 AM To: [email protected] Subject: CS>Pulsed DC method Has anyone had any experience with the pulsed DC generator located at http://web.idirect.com/~showcase/althealth/cspulse.htm ? It refers to current ranges from 3 - 8ma. I ran a batch last night and could only draw 1.4ma(at the Silver electrodes) after 2 hours. The solution was clear and is still clear as of this morning. The taste is extremly bitter. I had to add 3 parts distilled water to 1 part of solution in order to make it tolerable. I checked the CS solution's resistance with a 16VDC source at the electrodes. The current draw was 3.23ma. 16VDC/3.23ma = CS resistance 4.95Kohms = CS resistance The only setup exceptions were that my electrodes are flat not round, and the distilled water was not heated. Why would the CS solution be so bitter and still remain clear? Would this be considered a strong solution(high ppm), or did I make somthing other than CS? I took 1 tspn after I made it. It burn my chest bad enough that I had to drink some water to stop the burning. I looked at the solution with a laser pointer and saw plenty of sparkles(I assume this was silver).? Thanks BillH -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] List maintainer: Mike Devour <[email protected]>

